Results 1 to 14 of 14
Threaded View
-
10-05-2004 03:10 PM #2
# 1 question is yes you can do it this way, its a good idea to go this route when time is limited.
one panel at a time till its all in first coat of primer.
#2 , I usually will grab a piece of 180-220 grit and hand rough the repair area up pretty good.
#3, That is a good question and have forgot if lacquer is reccomended over epoxy, i will have to check.
(Might check with your jobber of the product you are using to make sure about compatibility.)
Spray
Dammit, another good ol boy gone. Condolence to the family. RIP Mike
RIP Mike Frade, aka 34_40