31Likes
Results 1 to 15 of 35
LinkBack URL
About LinkBacksThreaded View
-
10-10-2014 11:28 PM #8
CHR Member/Contributor
- Join Date
- Apr 2005
- Location
- bay city
- Posts
- 10,546
what if you just take out one broad middle then just balance the make up on the board around the tubs looks like it woud not be much so two new boards. start were you want the SS trim to lay it out. check if one board out will work zipping the SS trim around the tub looks like that could work have or know someone with a mill ? it would be not to bad mount the trim strip to hard wood to hold it so you do not rap up the trim in the quill of the mill . last thing i would do would be cut the tubs. i have a 55 pickup that still is running around same tubsLast edited by pat mccarthy; 10-10-2014 at 11:41 PM.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
time for a new forum to visit. when they sold sr.com it went down hill fast. no more forum just a cheap site selling junkie cars. the canadians killed hr.com. mods are real pricks. as with any site...
Where is everybody?