Printable View
I went to start preping my frame for de Por-15, I have some good rust scaling goin on, My frame is Boxed I know its rusting on the inside rails I can see it wif a light threw the factory holes in the frame, How do I get the inside of my frame 1 Cleaned for por 15 and 2 how do I get the por 15 inside the frame shy of plugin what few factory holes there are and filling the frame and shaking it to cover all sides:LOL:
Otto
I use an old undercoating gun, it has a 3ft nozzle. I don't know if "Body Shutz" guns are available anymore but they were cheap and work good. Check your paint supplier.
Thanks I'll look inta that Monday.
Otto
Can you safely spray Por-15 over rust or does the metal have to be completly clean?
Pro all the loose parts have to be knocked off, but the metal doesnt have to be as clean as it would for paint.
Otto
I've never used it. Can you paint over it like you would over Primer?Quote:
Originally posted by ljotto1
Pro all the loose parts have to be knocked off, but the metal doesnt have to be as clean as it would for paint.
Otto
Thanks Streets:Quote:
I did not know that.
I see por-15 in my future.
Por 15 is great!!
I just used a product called rubberized underkoat made by Lawson, is comes in a rattle can it worked great in my trunk but por-15 is the only Product to go on my frame!!
Otto