Thread: What's the process?
Hybrid View
-
02-16-2006 12:08 AM #1
What's the process?
I got my '69 Chevelle sanded down to bare metal with some small spots of paint here and there. I need to know what to use to seal it now.
1. What do I use as a sealer?
2. Do I do the body filler on bare metal or over the sealer?
3. How many coats of sealer before I can go to buildable/sandable primer?
Any help is appreciated...RAY
'69 Chevelle--385
'68 Camaro--Twin Turbo
'78 Luv--383
-
02-16-2006 06:43 AM #2
This is an old topic here and you will get a lot of answers.
Epoxy primer
Filler (of your choice) I like Tack Free, Rage, Clear Coat
2K Primer Surfacer
Sand reprime
Sealer
Paint
This is a condensed version, Some of the old threads go into detail. Hope it will get you started.
-
02-17-2006 02:50 AM #3
Has anyone used rust bullet? I am wanting to spray my whole car with the rust bullet, then filler, then one more coat of rust bullet, then high build primer and paint and clear. Will that work?RAY
'69 Chevelle--385
'68 Camaro--Twin Turbo
'78 Luv--383
The main function of your little toe is to make sure all the furniture in the house is in the right place.
the Official CHR joke page duel