The bottom of the car looks great, nice job fitting the exhaust in there!
Printable View
The bottom of the car looks great, nice job fitting the exhaust in there!
Nice! Big block, three speed trans, and 3.50 gears. That should have an impressive off the line launch.
Couple quick things we are working on, putting a ABS plastic headliner and back panel so we are working on forming, cutting and fitting them before they get upholstery, also trying to mount some 4x10 speakers in the cab corners.
Attachment 75301
Attachment 75302
Next door the neighbor is hard at work on the seats, here is how they are turning out.
Attachment 75303
That is looking great! On the headliner, did you have to cut it, or just heat and bend it after taking measurements?
Speaker mounts are done and most of the interior panels are finished except door panels.
Attachment 75345
Attachment 75346
Attachment 75347
Should finish up the panels this weekend and pull them back out for upholstery, then we can start running all the wiring, get next door and finish sanding the bed and get it on and out of the paint booth. My battery holder is located under the passenger front fender.
Attachment 75348
Got a lot done, looks good. Interesting location for the battery.
All but the headliner are back out of the truck, need to figure out wiring, also headed back next door to finish sanding the bed.
Here is the flux capacitor.
Attachment 75371
some 4x10 in the corners, 6" was a smidge too big.
Attachment 75372
hiding the amp and media player under the passenger seat.
Attachment 75373
driveshaft is installed.
Attachment 75374
power steering hoses are on.
Attachment 75375
Looking good, the finishing up details sure do eat up a bunch of time and money, don't they? I always figure when it looks like you have a couple of good days work left things should be wrapped up in a month or three!
Impressed how you fit those speakers in there.
Very nice work! All the little things needed to finish a build sure take a long time to find and get so you can keep making progress. Did you cast or have the piece on the back of the rear end laser cut out?
still working on things
Attachment 75389
Attachment 75390
I think the rear panels are finished, everything needs to come back out.
Attachment 75392
Yesterday I added a couple coats of deck sealer to the bottom side of my bed wood, plus some of the shiny parts waiting for their new home.
Attachment 75393
Looks great, very nice work!