
Thread: New to the forum with a Chevy Small Block
Threaded View
-
08-13-2019 01:43 AM #2
Welcome from another Louisiana hot rodder!
Good story about your engine, but I need to add something. If the cam is a flat tappet cam and has been used, it would not be a good idea to reuse it. It will probably fail very quickly, even with new lifters. Now, if that's a roller cam, you're probably ok.
Good luck on the project and the upcoming stint in the Navy.Mike
I seldom do anything within the scope of logical reason and calculated cost/benefit, etc-
I'm following my passion
I believe this was somewhere around 2015, Rick, Rosie and Johnboy
John Norton aka johnboy