Thread: New guy - 33 Ford builder
Results 16 to 30 of 33
LinkBack URL
About LinkBacksHybrid View
-
03-09-2009 08:50 PM #1
CHR Member
- Join Date
- Dec 2008
- Location
- Enterprise
- Car Year, Make, Model: FFR 33 Hot Rod DOHC 4.6L
- Posts
- 70
A few recent pics
Last edited by geoffav; 03-09-2009 at 08:53 PM.
-
05-12-2010 10:12 PM #2
CHR Member
- Join Date
- Dec 2008
- Location
- Enterprise
- Car Year, Make, Model: FFR 33 Hot Rod DOHC 4.6L
- Posts
- 70
It's been awhile since my last post and I took a pretty long break to get my house ready to list and finish some plans for the new place.
I'm not far from from starting the body work.
-
05-12-2010 10:21 PM #3
CHR Member
- Join Date
- Dec 2008
- Location
- Enterprise
- Car Year, Make, Model: FFR 33 Hot Rod DOHC 4.6L
- Posts
- 70
I just got my MegaSquirt parts to build last week. I've finished the relay board and Stimulator. The ECU is next and will probably take a week or so at the rate I work and with this being my first MS.
It's a MS2 but will be built upgrade ready in a MS3 case. I would like to have the USB support and SD card datalogging that comes from the MS3 daughter board. I don't plan on the MS3X card but I might build my harness so a switch to sequential injection will be easier.
-
05-24-2010 04:12 PM #4
CHR Member
- Join Date
- Feb 2007
- Location
- SLC
- Car Year, Make, Model: 52 Chevy 2-door Sedan w/ a 350/350 combo
- Posts
- 341
Nice gauges. They will look sharp installed!
Pride Runs Deep
-
05-24-2010 05:54 PM #5
CHR Member
- Join Date
- Oct 2005
- Location
- Lawrenceville
- Car Year, Make, Model: 1946 Ford Coupe
- Posts
- 410
Loving it ..... I wish I'd bought one.
REGS
-
05-24-2010 11:19 PM #6
CHR Member
- Join Date
- Dec 2008
- Location
- Enterprise
- Car Year, Make, Model: FFR 33 Hot Rod DOHC 4.6L
- Posts
- 70
They have a great special on right now. Free top or fenders and if you make it in the first 10 to order they throw in a tilt column.
I keep the FFR 33 Registry map up and I just added car 210. Mine is #37 and I think we have over 20 completed. It seems to be a pretty solid car. We have one that is approaching 2000 miles with no issues of consequence. There are probably others with higher mileage but not everyone checks in on the forums.
-
10-17-2010 06:46 PM #7
CHR Member
- Join Date
- Oct 2005
- Location
- Lawrenceville
- Car Year, Make, Model: 1946 Ford Coupe
- Posts
- 410
I'm hanging on every update.
What upgrades are you speaking of for the suspension? I've watched the vids & it appears that that is the one thing they actually really worked out.
Ratty 46Last edited by REGs; 10-17-2010 at 06:56 PM.
-
10-17-2010 08:04 PM #8
CHR Member
- Join Date
- Dec 2008
- Location
- Enterprise
- Car Year, Make, Model: FFR 33 Hot Rod DOHC 4.6L
- Posts
- 70
The suspension upgrades are really minor. I have to change out the 4 steering arm bolts for a new spec from FFR. They use these silly boots for the upper ball joints that have to go. We found some that actually seal on both ends, not the open at the top crap that the car came with.
I made a poor choice when I selected my fuel filters so those will get changed out too. My ECU is still in the little ziploc bags because I had some confusion on which parts of the MS2 I could leave off. I now have ALL of the MS3 components to include harnesses so I'm ready to get started on it this week too.
-
10-17-2010 08:12 PM #9
CHR Member
- Join Date
- Oct 2005
- Location
- Lawrenceville
- Car Year, Make, Model: 1946 Ford Coupe
- Posts
- 410
I keep going back to the FF web site & looking at the fendered '33 .... I dig that soooo much.
Ratty 46
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
I'm on Firefox and generally don't have any problems.
Back online