I don't know, just thought I would post in here to tell about my never ending projects.
http://www.msnusers.com/fuelcutswitch/shoebox.msnw
If you go to that link there is 3 pages of pictures of my projects, the car that has the most pictures is my 1987 Mazda RX-7, TII. Originally it was a turbocharged rotary engine car. But the engine needed rebuilt, and that usually costs alot of money that I don't have, so I figured that hell I would just put a different motor in the car. And originally I planned on putting a 400 small block 4 bolt main in the car. But after a while my brother talked me into putting an engine out of a 1987 Toyota supra turbo into my car. And so we took on that project, and it has been going on for about 1/2 a year now, with the end finally in sight. And it should be putting out about 400 HP, in a 2,700 lb. awsome handling little beast of a car. Because we a putting a T04 upgraded turbo, a 50mm (about 2 inch) HKS wastegate, a turbo XS type H RFL, and all the supporting modifications to the engine. So it should be a bad ass car to say the least (or at least I hope it is!!!) And I will have alot of pride in it, since we have custom fabricated everything for the swap in our gaurage, about the only thing we haven't made for the swap, was the driveshaft which I had to have made by master fabricators of Augusta GA (I would recomend them to anyone in the area that needs work like that done!!!) And my brother has wired all the engine's electronics, which was/is the hardest part of the swap, since I am useing the stock toyots supra turbo ECU, so we had to integrate the two electrical systems together.
And the next project is the one that most everyone on this forum will probably like more! It is a late 20's chevy 3 window coupe, that we just pulled out of the woods about 1 week ago, there is only 2 pictures of it on that last page. But we are going to restore the body close to original (maybe put a cage in it for safety), and we will put in a 454 BBC, and hopefully a 5-6 speed manual tranny, but it will problably get stuck with an auto 4 speed. Other tha future plans for the car there isn't much to say about it, exept it's a long way fromt driveing.
And my 3rd/final project is a 1937 John Deere, Unstyled B, long frame. It is pretty much all original exept for a newer paint job, that isn't the best quality. So it is the project that is the closest to being show ready, because all it needs is sandblasted, and painted. And it will be ready to show/go :-) It's one of the tighest antique john deere's I've ever seen the tranny is tight, and the engine will start on the first pull of the flywheel (since it is hand start). So there isn't to much to say about it. Also there is one picture of it in there to.
And my step dad's project is a 1939 chevy truck that I bought when I was 10 years old, for $600 bucks out of the wood in Knoxville TN. And I finally got fed up with him not helping me work on the trucks body/chasis, so I said screw it and I listed it in the paper for $800, and after it ran threw like 2-3 times with no interest my step dad said he would buy it for $600. So I sold it to him, and with that money I turned around and bought another mazda RX-7. Which was a mistake because that car was a worn out piece of shit. And the motor of the RX-7 acctually blew up on the guy that bought it from me before he even got it home (sucks for him ;-)
Well that is it for mine, and my step dad's projects at the moment, but there will definatly be more in the future. And hopefully my supra7 (the combination of a toyota supra turbo, and a mazda RX-7 TII) will be running in the very near future.
Anyways, some feed back on my projects would be pretty cool. :D
