Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: Spark plug wires coming loose on 392 Hemi...
          
   
   

Results 1 to 8 of 8

Threaded View

  1. #6
    Hombre259's Avatar
    Hombre259 is offline CHR Member Visit my Photo Gallery
    Join Date
    Dec 2008
    Location
    Out in The Country
    Car Year, Make, Model: 55 Chevy 210-57 Chevy 2 dr wagon-48 Ford
    Posts
    374

    OK Bill here's a couple of pics. Your 392 is the same as this Desoto or should be. The ceriamic Hard boot ( the long one) has a rubber boot inside of it, inside of that rubber boot is the spark plug snap connector, the one that makes contact and slips over the plug itself. Slide your pliers between the rubber and the connector and turn one side of the connector towards the center. This should tighten the connector. Phewwwww I hope that makes sense......

    Roland
    Attached Images
    Protected people will never know or understand the intensity life can be lived at. To do that you must complettly and totally understand the meaning of the word "DUCK"

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink