-
09-29-2006 01:44 PM #1
How to build a 400 hp dodge 360.
I have a dodge 360 with 10.1 compresion, ported J heads, crane cams flat tappet 284 duration on intake and exhaust with a .480 lift Edelbrock torker intake and a holley 600 cfm and standard vulume oil pump. Do you think this engine is close to making 400 hp? Should I use a bigger carburater? IF i put 1.6 roller rockers on it would it be closer to 400 hp?
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
09-29-2006 01:47 PM #2
Maybe someone with a Desktop Dyno will step up......PLANET EARTH, INSANE ASYLUM FOR THE UNIVERSE.
-
10-22-2006 08:52 PM #3
i ran your motor on my dyno desktop and the results
410HP @6000RPM and 405 ft lbs torque @ 4500RPMs, stout motor!
Welcome to Club Hot Rod! The premier site for
everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more.
- » Members from all over the US and the world!
- » Help from all over the world for your questions
- » Build logs for you and all members
- » Blogs
- » Image Gallery
- » Many thousands of members and hundreds of thousands of posts!
YES! I want to register an account for free right now! p.s.: For registered members this ad will NOT show
Well I've sure gotten old too so don't worry about it! I've had two bypass surgeries, new knees, fought prostate, cancer and diabetes. I'm half blind, can't hear anything quieter than a jet engine,...
the Official CHR joke page duel