so can anyone tell me the difference in my 66 b body and a 67 b body?
Printable View
so can anyone tell me the difference in my 66 b body and a 67 b body?
More headlights? Just kidding. They look the same to me, but I bet some of the Mopar guys here can go into more detail.
im going to buy headders but nobody has given me a strait answer
I'm sure the manufacturer has a catalogue that will tell you what model header you need.
Ok so i bought a set of hedders for the 67 body and they bolted right up like nobodies business. worked great.
thanks eric
There is actually no difference in the Coronet and Belvedere series B bodies for the period 66-67. They share identical floor pans, unibodies, roof lines, A, B, and C pillars, wheelbase, etc. Same torsion bar length, track, steering, engine location, etc.
The engine choice did switch from the old poly 318 in 66 to the new LA318 in 67. That is normally why they show a change between the two model years.
The engine choices in the B-body for 1966 included the slant six at 225 cubic inch, 318 poly, 273 LA V-8, 361 BB, 383 BB, and 426 Hemi.
For 1967 the LA 318 was added and the poly was dropped, the 361 BB was dropped and the 440 Magnum was added to the GTX, RT, and 660 production B body Chargers.
Small block headers fit the LA small blocks and BB headers fit the Big blocks in the 66 or 67 cars. Hope this helps.
Sorry...got you the answer a little late....but happy Moparing.
I have a '66 Belvedere and I am haveing problems getting answers for header fittment. Where did you get yours and what model number were they? does your car have a 727 tranny? Power steering? What motor are you running? Sorry for all of the questions, but you could really help me out.
Thanks
he has`nt been here for a year and a half .. kinda doubt he will help you . maybe someone else can
More like 4 1/2Quote:
Originally Posted by HOSS429
His thread was 4½ years ago but HOSS is right, he made his last post 1½ years ago (on 9/29/2009), unfortunately it's doubtful olibass is going to get a reply from him. :DQuote:
Originally Posted by NTFDAY
Mike
Which engine do you have?Quote:
Originally Posted by olibass1
Jim
I have a 360. Has headers on it now, but they're kinda trashed and I don't know how to identify them. Would there possibly be a stamping of a part # of some sort? I've found a few that say they fit my vehicle, but the footnotes say not with a 727 trans and only with a mini starter. Obviously, there's some company out there, because I have a set on my car now. Any help would be appreciated.
hooker is your friend ( hooker headers ) that is
I'll check 'em out....thanks
Yep them old Dodges can be a tight fit.
In my big block charger I had to disconect the motor mount and jack up the motor just to change the spark plugs on that big 440 Magnum. Can you say tight.
Lots of the guys were taking hole saw's and cutting holes over the spark plugs in the wheel wells on the passenger side, to make it easier to change the plugs.
Kurt
Check with Summit Racing. I got a pair of their headers. Really nice looking. Just tell them what you have and they may be able to help you.