this car is sold
Printable View
this car is sold
if you got all the brackets, mount it to the floor in a comfortable place for your arm length,if the shifter has reverse cable hookup then you can drill the floor hole either in front or behind the shifter witch ever position has better clearence for the cable.on the trans you will need to use two pan bolts with spacer to clear the roled lip of the pan, then put the ajustable end of the cable in the eye of the trans bracket replace the stock trans lever with the shorter one to match the shifter then put the shifter and trans in low gear and ajust linkage so end fit in lever with out forsing it ,all other gears should line up, good luck.;)