Results 1 to 15 of 17
LinkBack URL
About LinkBacksHybrid View
-
11-03-2008 05:55 PM #1
CHR Member/Contributor
- Join Date
- Apr 2005
- Location
- bay city
- Posts
- 10,546
take the adapter plates off and mill 1/8 off and put the back on if you can some times you can take the water pump back plate off and press the pump shaft in more and trim what hit the back plate or do what i did to a bbc pump grab it with a r8 collet by the nose and use a carbide parting tool mounted up on the deck of the mill and face the hub down and mounted a stop to keep the pump body from spining if a alum pulley trim that to or work off a bit of more then one thing.i have been there and done all of it. you do not want the pulleys off at allLast edited by pat mccarthy; 11-03-2008 at 05:59 PM.
Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
I know this is a little early but, this site is down more than it's up, so...................... Here's hoping everybody has a great holiday season and my best wishes for a great and prosperous new...
Merry Christmas and Happy New year