Results 1 to 14 of 14
LinkBack URL
About LinkBacks-
03-28-2007 03:32 PM #1
CHR Member
- Join Date
- Nov 2006
- Location
- west olive
- Car Year, Make, Model: 1997 S-10 357c.i.
- Posts
- 225
Whats a decent asking price? 440
Thinking about selling my newly rebuilt 440. I'm asking opinions on a good selling price. Its a 1976 motorhome block bored .020. cast crank, Zollner flat top pistons, 906 heads with new valves, and harded seats installed. Has about 9.6-1 cr. Weiand action plus intake and holley 750dp with a proform center. Has a comp cam double roller chain tg, crane pushrods. hv oilpump with a 7 qt. pan. headers.The cam is a Chet Herbet 214/444. I found it n.o.s. on ebay. Its a great 0-4000 rpm cam. I have ran it in the truck for a total of about 1 hour since it was built. Not had it on the road yet. It sounds tight and VERY healthy. Holds 75 psi off oil pressure constantly. Has dual remote oil filters. Point distributor.I have pictures of it in my link below. I am thinking about changing over to a small block setup( chevy) to make the project easier to finish, and could really use the money as baby #2 is only a week or two off. Got an idea what shes worth? Would like to hear from ya.
"oohh...thats gonna leave a mark!"
1997 s-10, 357 C.I., 350 turbo, speedpro 11:1,Comp Cam custom grind mech. roller, Canfield heads, 1.6 roller rockers, edelbrock tm-1, holley 750sp, Hooker Headers, MSD, 3K B&M stall, 4:11 gears
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
03-28-2007 03:44 PM #2
CHR Member/Contributor
- Join Date
- Jul 2003
- Location
- Madison
- Car Year, Make, Model: '67 Ranchero, '57 Chevy, '82 Camaro,
- Posts
- 21,160
Nice engine!!! Think you'd really regret replacing it with a plain old chebby.....Yesterday is history, tomorrow is a mystery, Live for Today!
Carroll Shelby
Learning must be difficult for those who already know it all!!!!
-
03-28-2007 03:58 PM #3
CHR Member
- Join Date
- Nov 2006
- Location
- west olive
- Car Year, Make, Model: 1997 S-10 357c.i.
- Posts
- 225
Oh Dave I know! If I can't get a decent price for it, I won't part with it. I even got the 727 bolted to a amc short tail attached to a dana 300 transfer case! Its gonna be a stump puller no doubt! Just trying to get ahead on the bills and baby costs. Also like I was saying, a change in front end setups, (axle and running train) would simplify my build in the long run."oohh...thats gonna leave a mark!"
1997 s-10, 357 C.I., 350 turbo, speedpro 11:1,Comp Cam custom grind mech. roller, Canfield heads, 1.6 roller rockers, edelbrock tm-1, holley 750sp, Hooker Headers, MSD, 3K B&M stall, 4:11 gears
-
03-28-2007 05:39 PM #4
CHR Member
- Join Date
- Jan 2006
- Location
- fort myers
- Car Year, Make, Model: '27 ford/'39 dodge/ '23 t
- Posts
- 11,033
Engine looks good and it seems you have put it together well. Hard to put a number on it, but it will only cost you a little money to put it on Ebay and find out. Put a reserve on it that you can live with and see how it goes.
We've all been in the same boat financially as you and have done the same things to survive. Family obligations come first, and your day will come to do this all over again. Been there, done it a million times.
Don
-
03-28-2007 05:55 PM #5
CHR Member
- Join Date
- Nov 2006
- Location
- west olive
- Car Year, Make, Model: 1997 S-10 357c.i.
- Posts
- 225
Thanks for taking time to check it out Don. When the little one gets big enough, I'll make him build me one for payback! lol"oohh...thats gonna leave a mark!"
1997 s-10, 357 C.I., 350 turbo, speedpro 11:1,Comp Cam custom grind mech. roller, Canfield heads, 1.6 roller rockers, edelbrock tm-1, holley 750sp, Hooker Headers, MSD, 3K B&M stall, 4:11 gears
-
03-28-2007 06:09 PM #6
CHR Member
- Join Date
- Jan 2006
- Location
- fort myers
- Car Year, Make, Model: '27 ford/'39 dodge/ '23 t
- Posts
- 11,033
Great idea. Why do you think I have Dan do all my welding? He owes me BIG TIME.
Don
-
03-28-2007 07:40 PM #7
CHR Member
- Join Date
- Aug 2004
- Location
- Austin
- Car Year, Make, Model: 32 Roadster, BBC
- Posts
- 962
Dave there you go again.Nice engine!!! Think you'd really regret replacing it with a plain old chebby.....
Embrace the superior technology and materials of Chevy.
KitzJon Kitzmiller, MSME, PhD EE, 32 Ford Hiboy Roadster, Cornhusker frame, Heidts IFS/IRS, 3.50 Posi, Lone Star body, Lone Star/Kitz internal frame, ZZ502/550, TH400
-
03-28-2007 08:05 PM #8
CHR Member
- Join Date
- Aug 2006
- Location
- Redmond
- Car Year, Make, Model: 1942 IH K3
- Posts
- 508
Please excuse my remark.Last edited by 42K3; 03-28-2007 at 08:14 PM.
-
03-29-2007 07:00 AM #9
CHR Member
- Join Date
- Nov 2006
- Location
- Halifax County
- Car Year, Make, Model: 48 DeSoto Delux
- Posts
- 460
Originally Posted by Dave Severson
..Well said.
JackK.I.S.S. 
-
03-29-2007 07:07 AM #10
CHR Member
- Join Date
- Dec 2004
- Location
- gainesville
- Car Year, Make, Model: 1973 porsche 914 283 v8 '65 Galaxie 406
- Posts
- 335
well how much would you want....my aunt just sent me a 1970 scamp....i have to be honest i have never really paid much attention to mopars will a 440 fit into a scamp? or would i be better off with a small block?Honda Motor= 1.6L
Soda Bottle= 2L
-
03-29-2007 12:56 PM #11
CHR Member
- Join Date
- Nov 2006
- Location
- west olive
- Car Year, Make, Model: 1997 S-10 357c.i.
- Posts
- 225
Tyler, pm'd ya."oohh...thats gonna leave a mark!"
1997 s-10, 357 C.I., 350 turbo, speedpro 11:1,Comp Cam custom grind mech. roller, Canfield heads, 1.6 roller rockers, edelbrock tm-1, holley 750sp, Hooker Headers, MSD, 3K B&M stall, 4:11 gears
-
03-29-2007 02:30 PM #12
CHR Member/Contributor
- Join Date
- Jul 2003
- Location
- Madison
- Car Year, Make, Model: '67 Ranchero, '57 Chevy, '82 Camaro,
- Posts
- 21,160
Well, if they had either, I would!!!!! Originally Posted by kitz
Dave there you go again.
Embrace the superior technology and materials of Chevy.
Kitz
My point was, everybody puts a chevy in everything... A big block Mopar would be nicer to look at then another sbc.....Yesterday is history, tomorrow is a mystery, Live for Today!
Carroll Shelby
Learning must be difficult for those who already know it all!!!!
-
03-29-2007 03:01 PM #13
CHR Member
- Join Date
- Nov 2006
- Location
- west olive
- Car Year, Make, Model: 1997 S-10 357c.i.
- Posts
- 225
:d :d :d :lol: :lol: :lol:"oohh...thats gonna leave a mark!"
1997 s-10, 357 C.I., 350 turbo, speedpro 11:1,Comp Cam custom grind mech. roller, Canfield heads, 1.6 roller rockers, edelbrock tm-1, holley 750sp, Hooker Headers, MSD, 3K B&M stall, 4:11 gears
-
03-29-2007 05:59 PM #14
CHR Member
- Join Date
- Nov 2006
- Location
- west olive
- Car Year, Make, Model: 1997 S-10 357c.i.
- Posts
- 225
Just in case anyone is interested, I went to E-bay completed sales in their advanced search and found what comparable engines have been selling for. WOW!
I found 3 that were at the $4000+ marker and SOLD. I have more in this engine that they had. So I guess we know now. Thanks. So you guys with the 440 mild BB mopars have an idea of what they are worth. 
"oohh...thats gonna leave a mark!"
1997 s-10, 357 C.I., 350 turbo, speedpro 11:1,Comp Cam custom grind mech. roller, Canfield heads, 1.6 roller rockers, edelbrock tm-1, holley 750sp, Hooker Headers, MSD, 3K B&M stall, 4:11 gears
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
I launched a set of books today aimed at small children. Even managed to hit three of the little beggars...
the Official CHR joke page duel