Printable View
I need the exact bold patern for the 392
I must make a adaptorplate to get the 4L80E behind it.
So what I need is a exact drawing of the rear of the 392
with the exact locations of all bold holes
pins and center of crank location.
I canT find it on the internet.
Regards
Remco
The Netherlands
I'm sure these guys know, but I don't know if they'll tell you....
http://www.transmissionadapters.com/index.htm
Or check with http://www.hothemiheads.com and see what they have on the shelf.
It's usually more complicated than just the adaptor, and involves a flex plate/flywheel that also must function with the starter your going to be using.