Hybrid View
-
12-11-2005 03:28 PM #1
1978 Nova
I`ve got a 1978 chevy Nova 355 cid . Here are a couple of things installed.444 lift cam ,flat top piston with 64 cc head (double hump). 8.5 10 bolt posi with 3.73 gears, rear disk brakes, Edelbrock 750, Air gap style intake, Headers.2000 stall conv.with a B&M shift kit. The body need work(paint and dent removal) no rust. The body has poly bushing.electric fan. The upper and lower control arms have new poly bushing as well,new MOOG front spring and new AFCO rear spring with 3 inch drop only in the rear There is a lot more installed on the car that I dont have time to list here. I`m asking $3500 obo.
-
12-14-2005 09:10 AM #2
1978 Nova
Well I`ve got more time. So here is more info. I ran the car once this year and ran a 13.99 1/4. It has a Autogauge tach, three gauge cluster,4 inch cowl hood, full edelbrock dress up kit (cast alum.),1 year old rug, pilot steering wheel, clairion sterio with 6x9 in the back deck 2 5x8 in the door and a set of twetters in the doors, new outer door mirrors and new rear view mirror,head liner was recoverd 1 year ago,the engine is a 355 SBC with a SFI rated fluid damper,1.5 roller rockers,Has flowmaster mufflers,new radiator support,new battery,The alt is about 1 year old with a MARCH bracket set up. The fuel pump is a Holley 110 GPM 7 psi mech.unit,The trans shifter is a B&M ratchet shifter, The car will go with a set of racing bucket seats and a set of 882 heads with a fresh valve job with .510 lift springs and new seals. Well that sums it up any further questions please feel free to call or email Thank
Welcome to CHR. I think that you need to hook up your vacuum advance. At part throttle when cruising you have less air and fuel in each cylinder, and the air-fuel mixture is not as densely packed...
MSD 8360 distributor vacuum advance