Well, I'm pretty reluctant to do this and know I’ll regret it, but I may just be too tall for this thing. I hoped that once I got the floorboards in I'd fit, but I'm a bit too close for comfort and can't go much lower on the seats without having my hamstring start twinging in pain. I figured I'd dangle it out there and see if anybody had something similar that I might fit in. I have all receipts for this car...even a cost tracking spreadsheet. (I know that's gay, but I'm a tight-wad). Hell- I even have a CD of all the build pictures.

I would prefer to find something in similar condition or maybe something worth a bit less and more complete. Want Pre-1935 ford maybe another coupe with a little less chop. Prefer to sell without the motor and tranny but will include the motor and tranny if there is a good deal to be had. I am somewhat open to offers of other interesting types of cars, but the big ass boats of the 50's and 60's don't excite me too much, unless they are real nice customs, or are speed maniacs. I would be open to entertaining the idea of an upward trade with cash as long as it isn't rediculous. Also consider a smaller trade if cash is involved to make up the difference. Anyway, here's the shpeal.....


Body and Chassis:
1929 Ford 5-window coupe (extremely solid)
Ladder bar suspension w/ panhard bar
Coil-over shocks
Boxed frame
Steel floorboards
Motor mounts for SBC 350
Steel dash
4" recessed firewall
Mr. roadster dropped front end (I think 6" lower than stock)
Radius rods
Chevy spindles
Competition Engineering coil-over top mounts
New Griffen Radiator
12-bolt rearend
Rear weld wheels
New Mickey Thompson tires in rear
Alloy wheels up front w/ older Goodyear eagles
Vega box w/ non-offset pitman arm
poly fuel cell (not installed)
Steel grill shell (not installed)
Grill insert
1 3/4" stainless steel streering column (not shown)
Bottom steering column swivel (not shown)
5" ididit drop column support (not shown)
Speedway Brake under-floor master cylinder setup (not shown)
Rear window garnish moulding
1960's camaro seats (need re-upholstered)
Auto Loc bear claw latches
Rumble seat hinge kit
no title yet


Chevy 350 motor (all parts are brand new, never been fired)
1974 4-bolt main block
bored 10 over (355ci)
speed-pro flat top pistons (floating pin)
speed-pro rings
Skat connecting rods
Eagle Crank
Clevite 77 bearings
Fel-pro gaskets
72cc heads w/ 1.6 and 2.02 valves and CompCams umbrella seals
High flow aluminum water pump
Aluminum pulleys
Aluminum timing cover
Blue racer double-roller timing chain
Lunati Voodoo cam
Lunati lifters
Lunati valve springs
Blue Racer push rods
Crane roller tip rockers
Melling high volume oil pump
non-oil bypass filter adapter
power force harmanic balancer
Weiand X-celerator intake manifold
Holley 670cfm street avenger carb
cal-custom style valve covers
Finned aluminum oil pan
Finned aluminum fuel pump block-off
Proform one-wire alternator
Aluminum alternator bracket
Aluminum water neck
Be-Coll 180deg high flow thermostat
adjustable aluminum timing pointer
Mallory Uni-lite distributor
Aluminum dizzy hold-down
stainless steel hardware
aluminum dipstick
ARP main cap bolts, rod cap bolts, and head bolts

Tranny:
TH 350 automatic
Finned aluminum tranny pan
Gennie Shifter

This would be an easy project for somebody to finish up. Needs top dash rail, rear deck lid, glass and garnish mouldings. Interior is also needed of course. Then a bit of body work. I have lots of pictures. It's all been done right.
I've got $9K in the body and chassis. $4K in the motor and $400 in the tranny. Send your questions, offers, picture requests, etc. to hotrodderguy@yahoo.com Thanks.

**may consider selling if nothing comes up

Pics here…more to come:

http://f2.pg.briefcase.yahoo.com/bc...d+Coupe&.view=l