Narrower front axle than rear on a 'T'..?

Can anyone help?

I've been offered a drop tube axle for my T-Bucket.

It's narrower than my I-Beam - but sure looks nice!

It's almost 44 inches from kingpin to kingpin - anyone driving anything similar?

Can anyone advise if it's a safe idea to swap out a narrower front end than the rear track?

Max Christoffersen

Mine's 48" pin to pin and is narrower than the rear, drives great.

Narrower track is not a safety problem, and 44" is only 2" narrower than a standard P&J tube axle.

However, if you're going from I-beam to tube, what kind of front axle locators do you have: Split wishbones, 4-bar or hairpins? That can make a difference.

Thanks for your help!

I'm using Total Performance leafs, Bat-Wings and hangers - and this new tube allows for an I-Beam style mount (percho bolts etc).

The trick is that my TP 26" leaf spring on TP Bat-Wings/hangers appears to fit the mounting holes exactly - and my luck is never that reliable, so I'm being very cautious. (The holes are mounted at 31.5")

So to work I'm after a drop tube that fits the Total Performance measurements and doesn't cause problems with the track/safety issues.

Thanks to you - I might just try my luck!


Max Christoffersen