I figure I'll go ahead and try and answer most of "Swifsters" questions, which would help you all understand more of what we have in mind with the Malibu.
* We figure a Daily Driver/Show, but only a sort of Street side Car show, which is all we have around here.
* Turns out this is going to have to be a "driveway project"
*Body work is going to be worked on by all of us, which we will be learning more and more as we go, all the more fun.
*The realistic condition of this car is, it has been sittin up for over a year maybe, umm some major and minor body rust, and we are currently trying to get the thing to start.
*Our plan of storage is our friends basement
*Plans for the V6 I think is to get it working good enough to at least get something for it to help with our budget a little bit, we need all the help we can get, so anything will do like that.

Now another question, I am currently looking into either an Orbit Sander or an Angle Grinder, to sand down the body to the bare metal, what works best of these two? Or which is actually meant for this type of work?