Shine, I have 7 degrees of caster and 1/2 degree of negative camber. I can't use shims to change caster because it's a coil-over suspension. Also, further caster adjustment with the hairpins would cause interference with the tie rod. In any case, I think 7 degrees is adequate. It did center after a turn before, but that scrubbing due to the monster toe really messed it up.

Jerry, the intersection of the kingpin center line with the tire patch is not ideal, but I don't have much I can do about that without buying new wheels, and that isn't going to happen right now.

I'll know more after my test drive.

F Panhard 2.jpg

F Quarter.jpg