Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 
Like Tree8Likes
  • 3 Post By glennsexton
  • 3 Post By NTFDAY
  • 2 Post By jerry clayton

Thread: 1979 SBC 400 police interceptor
          
   
   

Reply To Thread
Results 1 to 6 of 6
  1. #1
    DrGoob is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2015
    Location
    hartland
    Car Year, Make, Model: 69 Chevy C10
    Posts
    11

    1979 SBC 400 police interceptor

     



    Hey Im thinking about buying a 1969 chevy pickup. The guy that has it said that he and his father swapped the motor from a 1979 Chevy (Nova?) Police car. He said that the police car engines were different than the regular Chevy engines.... Is there actually a difference? I can't find anything on Google about there being different 400sbc's for that year. Is there anything special about this motor? Thanks in advance

  2. #2
    glennsexton's Avatar
    glennsexton is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Mar 2005
    Location
    Tigard
    Car Year, Make, Model: 63 Nova SS
    Posts
    2,572

    Welcome to CHR:

    Not to burst your bubble, but the 1979 Novas used by police departments were a reflection of the horrible performance era. The Nova 9C1 was offered to police agencies between 1975 & 1979. They were available with either a 170 horsepower 4.3L 265CI SFI engine(typical of a city police department) or a 200 horsepower version of the L99 350 used by state police. The 350s had some heavy-duty components (e.g., forged crank, heavy valve springs, etc.) that improved durability but they didn't get any performance-enhancing modifications.

    None had 400s – none were high performance.

    Get numbers off the engine and we can help you determine what it really is.

    Glenn
    NTFDAY, Rrumbler and rspears like this.
    "Where the people fear the government you have tyranny. Where the government fears the people you have liberty." John Basil Barnhil

  3. #3
    techinspector1's Avatar
    techinspector1 is offline CHR Member Visit my Photo Gallery
    Join Date
    May 2003
    Location
    Zephyrhills, Florida, USA
    Car Year, Make, Model: '32 Henway
    Posts
    12,423

    There is a casting number on the rear of the block on the driver's side, just in front of the bellhousing mating surface. It will usually be glommed up with grease and debris, so you will need to use a heavy-bristled brush and maybe a little solvent like kerosene to clean it up enough to read it. You'll also need a very strong flashlight or mechanic's trouble light to shine in there between the firewall of the car and the back of the motor.
    Here's the engine block casting number (looking from the rear of the motor).....
    http://www.speednik.com/files/2013/0...asylum-com.jpg

    Here's a set of brass, steel and heavy plastic bristle brushes available at Walmart....
    Cleaning Tools Toothbrush Style Mini Wire Brush 3Pcs - Walmart.com

    The other main identifier is a stamped number and letters on the passenger side of the block just past the end of the cylinder head, stamped into the block very close to the top water pump bolt on the passenger's side. It will be an alpha-number something like this....V0312CTG.
    You may have to remove the alternator or other engine-driven accessory to see it clearly.
    http://i224.photobucket.com/albums/d.../DSC09740A.jpg

    If you'll post those two numbers, the casting number from the rear of the block and the suffix number from the front of the block, we can probably nail down what the motor is and what vehicle it was built for at the factory.

    Remove one of the valve covers from the motor and post the casting number of one of the heads with us and we can really nail down the performance characteristics for you....
    http://www.speednik.com/files/2013/09/stockCastNo.jpg

    .
    Last edited by techinspector1; 04-22-2016 at 07:06 AM.
    PLANET EARTH, INSANE ASYLUM FOR THE UNIVERSE.

  4. #4
    DrGoob is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2015
    Location
    hartland
    Car Year, Make, Model: 69 Chevy C10
    Posts
    11

    thanks for the reply, i havent bought the truck yet, but plan to within the next week. i will talk to the guy and see if i can go up and check out the numbers first. i will keep you updated thanks!

  5. #5
    NTFDAY's Avatar
    NTFDAY is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2003
    Location
    Springfield
    Car Year, Make, Model: '66 Mustang, 76 Corvette
    Posts
    5,334

    The easiest way to tell if it's a 400 or not is by the harmonic dampener. The 400 has a deep indentation about half way around the dampener that the 350 doesn't have. The reason is that a 400 is externally balanced and the 350 is internally balanced.
    Ken Thomas
    NoT FaDe AwaY and the music didn't die
    The simplest road is usually the last one sought
    Wild Willie & AA/FA's The greatest show in drag racing

  6. #6
    jerry clayton's Avatar
    jerry clayton is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2006
    Location
    Bartlett
    Posts
    6,831

    Most 400 blocks only have 2 freeze plugs on each side while the other blocks have 3-----be careful looking as view could be blocked by motor mount, headers, starter,etc
    NTFDAY and 40FordDeluxe like this.

Reply To Thread

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink