Threaded View
-
09-29-2012 08:21 PM #1
My 41 Willys pickup pictures inside, tubbed rear etc...few questions
Hello all some of you have helped me a bit through my mechanical issues with this truck since I picked it up. Its been greatly appreciated and it is now all sorted out. Since I picked it up I removed the oversized 750 Holley carb that was fouling out my plugs and put on a 600 edelbrock. The ignition components were replaced, the fuel lines were all replaced with nice steel braid line, had to put in a fuel pressure regulator. Sorted out an electrical issue with the rear tail light that was burning my turn signal relay and fuse up. A few other things.....
So one issue I knew I would run into is this, finding body parts and trim pieces. It is a glass cab and front clip, the bed is all steel except for the tail panel that ive found. Im looking for a pretty specific piece here, The headlight trim surround.
any help here is appreciated!
So on with the pictures... I am fairly young and still learning alot of things, I know enough to be dangerous. My dad loved to go to the street rod show every year here in York pa, I loved it ever since. I broke into the scene a few years back with a 23 T bucket but my dream was a 32 Ford roadster or a 41 Willys. Im very fortunate to be able to own this truck, I had been looking for some time. Here it is:
Last edited by 1923tbucket; 09-29-2012 at 08:28 PM.
on small cars yes. but fat fender cars are pretty much the same in size and weight as the donor car. i found s10 brakes work great on fat fender and pickups. a deuce will just need manual brakes...
Time for brakes