Hybrid View
-
07-28-2012 10:53 AM #1
Steering throw side to side of 68-72 Chevelle?
Can anyone provide the steering throw side to side of 68-72 Chevelle?
Thanks
-
07-28-2012 03:51 PM #2
Alternatively, does anyone know the effective steering arm length built into the spindles of a 68-72 Chevelle?
-
07-28-2012 06:32 PM #3
that spindle was used in many gm cars fire birds .camaro. nova. mid size wagons. the spindle arm un bolts so same spindle. used in many gm mid size cars but if you need from center of spindle to tie rod center i can get you thatIrish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
-
07-28-2012 10:08 PM #4
That is exactly what I need.
Spindle center to center or tie rod on a stock 68-72 Chevelle.
If you could provide this it would be great.
Thanks
-
07-28-2012 10:11 PM #5
I think that dimension on a car that has manual steer would be the one I'm looking for.
Thanks
-
07-28-2012 10:18 PM #6
i think the arm s is the same dimensions . i have a set on my gto .i can get you what you need later todayIrish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
-
07-28-2012 10:21 PM #7
the car is manual steer any waysIrish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
Welcome to CHR. I think that you need to hook up your vacuum advance. At part throttle when cruising you have less air and fuel in each cylinder, and the air-fuel mixture is not as densely packed...
MSD 8360 distributor vacuum advance