Originally Posted by
40FordDeluxe
Randy, the 38 frame had some rot through I found after I got it home. The lower flange was very thin on the rh rear rail just ahead of the rear axle and has what looks like a crack but is a line from thin metal. I figured by the time I fixed that, boxed this frame, and made an X member again, I'd have a whole lot more time in the 38 frame than my 40 frame. All I have to do to the 40 frame is cut off the front rails and reattach the fronts of the 38. Once I get the cuts made, and get the 38 rails lined up, then I can weld them on. I'll be ready to box it and then I can start on the new MII cross member.