the last car i striped was a 63 caddy 4 door over 18 feet long of fun .i did dry strip many cars and trucks at the shops i work at many were Gm delamination but not many as big as this boat less sand paper and work. tape off joints lay paper on the floor keep the striper wet till it,s working up paint clean off with a body filler spreader brush more on till metal is allmost clean use a red 3m pad and lacquer wash dry .no damn sand or beating the guts out of the air compressor . i did a vett that some bone head use a steel house scraper on he could not tell the paint from the SMC i had alot of time getting it back were it would take primer