Thread: 1930 Chevrolet Radiator Apron
-
03-30-2011 07:38 AM #1
1930 Chevrolet Radiator Apron
I just acquired a lower radiator apron for my 1930 Coach and am wondering about the fit. When I set it in place, it rises about 1 to 1 1/2 inch above the frame rails in the front. That is due to the bumper mounting location on the top of the front rails. Is this correct?
http://www5.snapfish.com/snapfish/sl...0044_40840044/Last edited by itsmeb; 03-30-2011 at 07:41 AM.
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
04-04-2011 01:00 PM #2
I have a '32 Chevy and it's very similar. You have to mount the fender in order to see the exact location of the apron. It doesn't look like it's off too far. Good luck.Hans
If you can't use me as a good example, then use me as a horrible warning.
Awesome, I will put 5 quarts in when the time comes. I've always used Valvoline, what viscosity would be recommended for So.Cal.?, and thanks again
SB distributor won't fit