Thread: Wiring Harness Disconnect

Tweet

Originally Posted by robot

make sure the connector is sealed well. Otherwise, the contacts will corrode and you will be chasing electrical gremlins forever.

mike in tucson

I use dielectric grease on every electrical connection including the base or socket on light bulbs, also use it on spark plug wire ends. This helps to seal moisture out which cuts down the corrosion problem.

Mike (in Florida )

Originally Posted by Mike52

I use dielectric grease on every electrical connection including the base or socket on light bulbs, also use it on spark plug wire ends. This helps to seal moisture out which cuts down the corrosion problem.

Mike (in Florida )

So do I, but then about 25yrs ago I found a bottle of it at the Boneyard that was about the size of a quart oil bottle. The bottle is still over half full & like yourself Mike I use it on everything including nuts & bolts since it also can be used as an anti-seize....joe

Originally Posted by Mike52

I use dielectric grease on every electrical connection including the base or socket on light bulbs, also use it on spark plug wire ends. This helps to seal moisture out which cuts down the corrosion problem.

Mike (in Florida )

X 2, Good stuff