Thread: Need some help identifying a few things on my ride....

Tweet

You can purchase a remote kit that adapts to your existing master cylinder. a C.N.C lid with the remote reservoir and lines. I ran one on my last build, Nice thing there is a bleeder on the lid. though the manufacture's name is drawing a blank.

I have pics, but seems it will not upload

Originally Posted by Sellers Eqp

You can purchase a remote kit that adapts to your existing master cylinder. a C.N.C lid with the remote reservoir and lines. I ran one on my last build, Nice thing there is a bleeder on the lid. though the manufacture's name is drawing a blank.

I have pics, but seems it will not upload

Please email the photos if you can

rickantonio@att.net

Originally Posted by 98 SNAKE EATER

Please email the photos if you can

rickantonio@att.net

I shot you out a email wit ha link and pictures. ~S

Originally Posted by Sellers Eqp

I shot you out a email wit ha link and pictures. ~S

Thanx for the photo

Although, it looks like the double bail kits I've seen on the net and won't fit my single bail master

That being said, I've noticed a slight leak from the push rod, so I decided to pickup a regular replacement master from Speedway since I can't afford one of the fancy onces built for remote reservoirs at this time

Originally Posted by 98 SNAKE EATER

Thanx for the photo

Although, it looks like the double bail kits I've seen on the net and won't fit my single bail master

That being said, I've noticed a slight leak from the push rod, so I decided to pickup a regular replacement master from Speedway since I can't afford one of the fancy onces built for remote reservoirs at this time

in your pic of the lid, you have a ford dual master, not a single you can see by the rubber pad under the lid, looks to me like two jars to hold fluid just like a ford, they make them for ford masters and GM

Originally Posted by Sellers Eqp

in your pic of the lid, you have a ford dual master, not a single you can see by the rubber pad under the lid, looks to me like two jars to hold fluid just like a ford, they make them for ford masters and GM

By "bail", I mean the wire snaps that hold the lid in place.

Mine is a single bail and from what I've seen, the only ones available for the Ford masters are double bail

The double bail masters have a different reservoir design (round on both sides)

My master is round on one side and square on the other

Here's a pic from Speedway that is identical to what I have....

That resembles the master cylinder that on a 75 Duster I once owned.