Quote Originally Posted by pat mccarthy View Post
well used self taping screws any time i did not want to use clamps or did not have the room so you could check body lines drill for a plug weld then drill a 1/8 hole in pinch well or over lap run screw s in to hold it take one out at a time plug weld up screw holes .i hang hole front ends on this way upper rails .inner wells upper and lower cross bars and body tin rockers inners outers back panels 1/4 panles .box side. you name it i have screwed it what,s nice about useing screws is we use a 5/16 plug weld and hit the center of backer with a 1/8 hole and used a self tappers you could back if off and move it front back up and down get it all tune in and burn it on
Pat I'll crawl under the dash and see if the cordless drill fits up in there. That's a great idea.