My plans for the car are to update the front and rear suspension and the interior keeping most of the body stock appearing.

Here's the front suspension put together for now.



I got a got a good deal from a friend on the tires and wheels. They had only about a 1000 miles on them. They are Coker tires and Chevy rims the trim rings I had from my 95 Chevy pick-up. I kept them when I put new rims on the truck and saved them.



I pulled the rear end out and made some new spring hangers for the front and rear. I have a 2003 Chevy S-10 rear end for it and it fit perfect. I was going to use the stock S-10 springs but they had too much arch and the back end was too high might have been a little stiff too. I didn't want to use lowering blocks so I got a pair of lowering leaf springs from Chassis Engineering. Those are the S-10 springs in the picture.


Close up view