Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: 1974 ford pinto
          
   
   

Reply To Thread
Results 1 to 3 of 3
  1. #1
    turbo74pinto is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2009
    Location
    Willoughby
    Car Year, Make, Model: 74 pinto, 41 ford, 34 dodge
    Posts
    60

    1974 ford pinto

     



    one member asked to post some pics of my driver, so here they are. its a california car. 1974 pinto runabout with 71-3 bumpers. when i got it, it was set up with some roadracing stuff. i like the straight line and i like sleepers so i removed most of those parts. it has an 8 inch with 3.40s and a spool. the tranny is still a stock 88 turbo coupe t5. that will be going to a c4 eventually. the motor is out of the same turbo coupe. stock forged pistons with new rings and turned crank. the head is studded and ported. big valves this winter hopefully. boport 1.9 cam which is still hydrolic but is roller. fully ported lower intake. the upper intake is shortened 2.5 inches and rotated 120 degrees. its also modified to fit the 65mm throttle body. header is built by me and the turbo hanging off is a holset hy35 off a cummins auto ram. exhaust is 3.5 inches, no muffler and dumps at the rear axle. intercooler is a spearco and needs to be bigger, along with the tubing. for electronics, its an la3 eec out of the turbocoupe with a tweecer rt installed. all tuning done with the program binary editor on a laptop. injectors are 95# and it is converted to blow through mass air flow.
    the car is a definate sleeper as youll see by the pics. and yes i know the wiring under the dash is still a spider web. im still unsure where i want to run them out of the firewall. i think itll be where they are at now, but that may change.

    bob
    Attached Images

  2. #2
    HOSS429's Avatar
    HOSS429 is offline CHR Member Visit my Photo Gallery
    Join Date
    Jun 2007
    Location
    New Market
    Posts
    2,585

    cool stuff ... i`m seriously considering a paxton for my V6 chevy bean .. a kit is available for 500 horses with a stock engine ..
    iv`e used up all my sick days at work .. can i call in dead ?

  3. #3
    vara4's Avatar
    vara4 is offline CHR Member Visit my Photo Gallery
    Join Date
    Dec 2003
    Location
    Pahrump
    Car Year, Make, Model: 1947 International Pick Up
    Posts
    3,187

    I had a buddy in Vegas that had a 73 pinto not the hatch back though.
    He dropped a 302 in it with a B & M blower, Man was that thing fast.
    But the headers really took him some work, he had to cut holes through
    the side walls of the engine compartment to run them thru.
    I believe he was in the mid 9's in the 1/4 mile.
    I always loved that car, it was tubed and fat tires in the back skinny
    tires in the front and a single scoop right over the carb.
    It was painted a metalic dark forest green.
    Siggy had one fast pinto. Kurt

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink