Thread: Engine issues again
Results 1 to 3 of 3
LinkBack URL
About LinkBacksThreaded View
-
05-06-2009 04:51 AM #1
CHR Member
- Join Date
- Mar 2007
- Location
- Melbourne, Victoria, Australia
- Car Year, Make, Model: 32 3 window coupe
- Posts
- 48
Engine issues again
I have a pair of valve covers at the moment with no holers in them and i would like to keep them that way; im going for the clean and simple look...
I have planned for a PCV to be fitted into the rear of the manifold (at the base of distributor in a machined baffle) and into the carb.. Obviously what i need is an air intake in some form which im hoping can be done through the below device
If this will not suffice can anyone suggest any other method?!
By the way the engine block is a 94 ZZ4
Thankyou in advance for your help!Last edited by FATNLO; 05-07-2009 at 12:35 AM.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Well to be as brief as I can the first shoot of color looked good but when I started spraying the clear I discovered all these paint flakes on the hood and back of cab. The 3m plastic sheeting I was...
Stude M5 build