Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 
Like Tree335Likes

Thread: Electrathon - A Different Kind of "Hotrod"
          
   
   

Reply To Thread
Page 5 of 39 FirstFirst 1 2 3 4 5 6 7 8 9 10 11 12 13 15 ... LastLast
Results 61 to 75 of 580
  1. #61
    J. Robinson's Avatar
    J. Robinson is offline CHR Member Visit my Photo Gallery
    Join Date
    Jul 2003
    Location
    Titusville, FL
    Car Year, Make, Model: 31 Ford Coupe; 32 Ford 3-window
    Posts
    1,782

    In order to use an electric motor, an electronic motor controller is necessary. Without some type of controller, the motor would either be full-on or off; there could be no intermediate speed, no smooth acceleration, no real control. A mechanical potentiometer big enough to handle the amperage of two Optima batteries in series would be HUGE and heavy. Electronic controllers do the same job, but are substantially smaller and lighter than a mechanical potentiometer. They use a very low power electronic circuit to control the main power circuit. Although controllers can get expensive, the one I am using here is a remanufactured Scott controller that I bought a few years ago for $160.

    I located the controller near the motor, but far enough away so if I ever throw a chain it won't be likely to whip the controller. Mounting it was simple; I just fabricated a couple of tabs that match the bolt holes on the controller and welded them to the rear crossmembers.
    Attached Images
    Jim

    Racing! - Because football, basketball, baseball, and golf require only ONE BALL!

  2. #62
    RestoRod's Avatar
    RestoRod is offline CHR Member Visit my Photo Gallery
    Join Date
    Jun 2004
    Location
    In the Boonies of Ontario
    Car Year, Make, Model: 40 Graham Sharknose :58 MGA/Ford V6
    Posts
    1,307

    I would be interested in learning how you decided on that particular motor for this build. I remember that you said that "BAT" used a 1 hp Scott motor in his. How does the Briggs & Stratton motor compare to this and what other choices are available?
    I imagine that there is a balance between the power output and energy consumption so that you can maximize speed without draining the battery too quickly. Have there been any studies made on various motors to find out which are the most efficient?

  3. #63
    hotroddaddy's Avatar
    hotroddaddy is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2005
    Location
    jacksonville
    Car Year, Make, Model: 53 Ford Panel truck/59 tbird/73 VW Thing
    Posts
    1,656

    Where did you get the motor, and about how much does one set you back?

    The car is looking good! Ive mentioned this to a few friends, but no takers yet. Im gonna get somebody to make one with me, then we can race each other.

  4. #64
    The Bat's Avatar
    The Bat is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2009
    Location
    miami,coconut grove
    Car Year, Make, Model: 28rodster 292Y-block and HenryJ Olds V8
    Posts
    262

    Thumbs up

     



    OK,I'll tade Jim,HA Ha,mine for your Etek,actuly we got the old Scott from Jim,he told us it was the trick motor to use only about 4 or 5 years back or more,tell these new Etek came out and some others at much high cost.
    As for the Scott,most efficient?no,but the cost was just right $00000 and I would of give 2X that HA HA $0000000000
    Our controller is a old golf cart one that Rex [head part of our 3 man team Rolling Thunder] got from some one for free too.
    Yet were winning now and then again the big dogs motors

    Sure looks good,as this build gets better all the time
    Last edited by The Bat; 04-24-2009 at 06:58 AM.

  5. #65
    signshop's Avatar
    signshop is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2007
    Location
    Lansing
    Car Year, Make, Model: 64 Galaxie, 53 F-100
    Posts
    52

    [[In order to use an electric motor, an electronic motor controller is necessary. Without some type of controller, the motor would either be full-on or off; there could be no intermediate speed, no smooth acceleration, no real control.]]

    The full on or off reminds me of a minibike my Dad made when I was about 10. He used a bare frame and added a 12v starter motor out of a Mustang, converted to belt drive with a 12v car battery on the frame and an on/off switch. It was wicked fast but that thing was dangerous. Either 'on' or 'off' No brakes either, looking back I'm pretty happy I never got hurt on it.

    Cool build - I'm enjoying it very much!

  6. #66
    J. Robinson's Avatar
    J. Robinson is offline CHR Member Visit my Photo Gallery
    Join Date
    Jul 2003
    Location
    Titusville, FL
    Car Year, Make, Model: 31 Ford Coupe; 32 Ford 3-window
    Posts
    1,782

    Motors are as many and varied as there are people who use them and I am certainly no expert. I originally built my orange car and the silver car (pictured previously) with Scott 1hp motors. The Scott 1hp (also sold under the NPC brand name) is probably the most common motor in use in Electrathon because it is reasonably priced (about $260 new), plentiful, and reliable. Using 24 volts, it puts out 1hp continuous at 2800-3000 rpm. It is capable of up to 3 1/2hp under load. For its size and weight, it's a pretty efficient motor.

    Several years ago, Briggs & Stratton bought the rights (from Lemco, I think) to produce the Etek design that has a radial armature. They made a production run of them and they originally sold for about $395. As the supply started to dry up, the price began to escalate and I saw prices as high as $675 at one point. Fortunately, they are being produced again and the price now is in the $469 range. I bought the one I have 4 years ago for $425. At 24 volts the Etek produces 3 1/2hp continuous at 1728 rpm. It is capable of 8hp under load. It is also an efficient motor.

    I am using the Etek here because I am overweight for Electrathon (me personally, not the car) and the higher torque of the Etek gets my lard moving without power-spiking the batteries so bad under acceleration. I also have a couple of Scott motors and, although I didn't mention it above, they will fit the motor mounts in this car if I ever want to run one.

    The motor that Dana (The Bat) has is an old Scott that was traded to me a few years ago. It was probably 8 or 10 years old then and had dozens of races on it. I gave it to them so they could at least get on the track "until they could get something better". Dana's partner cleaned it and put a new set of brushes in it and they have been soundly thrashing all the competition ever since. Their success is a testament both to the reliability & competitiveness of the Scott motor and to The Bat's car-building extertise.

    Horsepower isn't everything, either... The car pictured below holds the world record for distance/speed in a sanctioned Electrathon event. It traveled 58 miles in one hour using a 1hp Lynch motor. Someone correct me if they know, but I think that Lynch L200 motor costs about $1600. For those of us on a budget, that's pretty steep for a motor ($425 just about broke me!). Occasionally, motors can be found in surplus stores and on Ebay for much less than new prices.

    I once considered trying to use a starter motor, but I was told that they won't live through this kind of use. Starter motors are built to produce very high torque for short bursts and burn themselves up with constant running. I don't know... I'm still tempted to try it someday...
    Attached Images
    Jim

    Racing! - Because football, basketball, baseball, and golf require only ONE BALL!

  7. #67
    J. Robinson's Avatar
    J. Robinson is offline CHR Member Visit my Photo Gallery
    Join Date
    Jul 2003
    Location
    Titusville, FL
    Car Year, Make, Model: 31 Ford Coupe; 32 Ford 3-window
    Posts
    1,782

    RestoRod - I'm sure some of the folks who have been doing this longer than me have done detailed comparisons. There might be some results online somewhere, but I have never researched it myself. Many Electrathon teams have websites with tons of info. There are links to some of them on the Electrathon America website (www.electrathonamerica.org).

    HRD - Motors are available from several places including National Power Chair, EV Parts, KTA Services, Pentad, Robot Marketplace, Cloud Electric, and others. (Just do a search for one of those or go to the Electrathon website for links to some of them) I have done business with most of them and all have given me good service. Prices are all over the spectrum. I bought a brand new Scott (NPC) from National Power Chair a few years ago for $180 on sale. On the high end, the sky is the limit.

    Bat - I'll trade motors with you if you make your driver gain a hundred pounds and disconnect one battery. Then I MIGHT have a chance of outrunning him...

    Signshop - How did that Mustang starter hold up on your old minibike? Did it ever get really hot? I have a friend who owns a salvage yard; he will give me starters if I want them... How far are you from Berlin Raceway (Marne, MI)? They have some Electrathon races coming up there in just a couple of weeks.
    Jim

    Racing! - Because football, basketball, baseball, and golf require only ONE BALL!

  8. #68
    The Bat's Avatar
    The Bat is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2009
    Location
    miami,coconut grove
    Car Year, Make, Model: 28rodster 292Y-block and HenryJ Olds V8
    Posts
    262

    Thumbs up Very cool aero body

     



    For every ones prospective;
    The super Fancy aero bodied car in photo post #67 is some very cool work indeed,but there record speed for one hr. was done on a super speedway,so it did not need to make turns like we do in most of our races here in Fla.
    Turns like we have would drop that cars speed a lot closer to what we are doing,that is if that car can even make turns as sharp as we're running ?.
    I think it's a big gain to have nice aero body if av. speed is above 25mph.
    OK,no deel then on the Etek,I think we need both bat's,nuts!
    Last edited by The Bat; 04-24-2009 at 10:26 AM.

  9. #69
    stovens's Avatar
    stovens is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2007
    Location
    Petaluma
    Car Year, Make, Model: 48 Ford F1
    Posts
    9,778

    Very cool speed car. Reminds me of some of the cars out at Bonneville!
    Jim this is a very cool thread. Looking foward to the rest of the mechanicals, wiring and accelleration linkages!
    " "No matter where you go, there you are!" Steve.

  10. #70
    signshop's Avatar
    signshop is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2007
    Location
    Lansing
    Car Year, Make, Model: 64 Galaxie, 53 F-100
    Posts
    52

    The starter we used on the minibike never seemed to get hot but we never really rode it a long distance. It had no way to control the speed - 50mph on a minibike is spooky so we just rode it in bursts on to accelerate off to coast...

    If you're worried about heat you could always duct some air directly in there too.

    I'm about an hour from Berlin. It's a nice facility (for a short track of course)
    Last edited by signshop; 04-24-2009 at 11:48 AM.

  11. #71
    J. Robinson's Avatar
    J. Robinson is offline CHR Member Visit my Photo Gallery
    Join Date
    Jul 2003
    Location
    Titusville, FL
    Car Year, Make, Model: 31 Ford Coupe; 32 Ford 3-window
    Posts
    1,782

    Stovens - Since you mentioned Bonneville, check this out: http://www.speedace.info/electrathon...tober_2007.htm 89+ mph at Bonneville in 2007.

    Signshop - Whenever the motor is enclosed, we duct fresh air to it. Notice the scoop on the side of car below; it's a direct vent to the motor... I looked at the Berlin schedule; that race runs on a Friday during the day. I guess it's for people who don't have to work for a living.
    Attached Images
    Jim

    Racing! - Because football, basketball, baseball, and golf require only ONE BALL!

  12. #72
    stovens's Avatar
    stovens is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2007
    Location
    Petaluma
    Car Year, Make, Model: 48 Ford F1
    Posts
    9,778

    Jim cool Bonneville car. Jim I noticed you sit way back at a fairly steep angle. Is it hard to drive for long periods of time like that, and how hot does it get in there?
    " "No matter where you go, there you are!" Steve.

  13. #73
    J. Robinson's Avatar
    J. Robinson is offline CHR Member Visit my Photo Gallery
    Join Date
    Jul 2003
    Location
    Titusville, FL
    Car Year, Make, Model: 31 Ford Coupe; 32 Ford 3-window
    Posts
    1,782

    Running a car at Bonneville would be a blast! Did you look at any of the videos on that site? I liked the in-car video.

    The reclined position is actually pretty comfortable once you get in. The cars are fairly tight inside, so they make you feel pretty secure (see pic below). The most important thing is finding a helmet/ headrest combination that supports your head comfortably. Without that, on some of the parking lot courses we run, your head will be lolling around like a bobble-head doll after just a few laps (been there, done that!).

    The fully enclosed cars can get pretty hot inside as they have little or no ventilation. Ventilation creates wind resistance, so... One of my kids lost four pounds during a race on a 91 degree day! The open cars may be slightly more comfortable because of fresh air, but open cars require long sleeves, gloves, and full-face helmets. If it's hot out, the driver is going to suffer a little regardless of which kind of car he/ she is driving. But hey, it's only for an hour at a time...
    Attached Images
    Jim

    Racing! - Because football, basketball, baseball, and golf require only ONE BALL!

  14. #74
    stovens's Avatar
    stovens is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2007
    Location
    Petaluma
    Car Year, Make, Model: 48 Ford F1
    Posts
    9,778

    Jim, I went back and watched a few videos including the cockpit view. Boy it gives you a great perspective of how much bobbing around is going on that close to the ground at those high speeds. I also watched his walk through video of the car. Very cool design. I might have to see if there are any local competitions and volunteer or at least go to a few races! I like the crew boss too!
    " "No matter where you go, there you are!" Steve.

  15. #75
    J. Robinson's Avatar
    J. Robinson is offline CHR Member Visit my Photo Gallery
    Join Date
    Jul 2003
    Location
    Titusville, FL
    Car Year, Make, Model: 31 Ford Coupe; 32 Ford 3-window
    Posts
    1,782

    Heh, heh, yeah Steve, the salt flats ain't exactly flat, huh? Imagine what that ride would be like in a car with rigid suspension! The walkthrough of that car shows what is possible with a few more bucks. Kirk is obviously very serious about this sport. Fortunately for us poor boys, most of the cars aren't quite that high-tech.

    The Oregon and Washington area is a literal hotbed of Electrathon activity, so maybe there is some activity in northern CA. I know that Petaluma is in northern CA; there used to be a team in Sacramento (Cordova High School), but I don't know if they still exist or if there were/are races held there. The event calendar on the EA website doesn't show anything past May, so I don't know what's coming up in your area.

    No wonder Mr. Swaney went down the salt so fast; he was in a hurry to get back to the pit boss!
    Jim

    Racing! - Because football, basketball, baseball, and golf require only ONE BALL!

Reply To Thread
Page 5 of 39 FirstFirst 1 2 3 4 5 6 7 8 9 10 11 12 13 15 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink