well i got the 360 in the 49 some what mocked up but keep hitting the firewall i dont mind cutting this i would like to talk to someone more knowledgeable about it any help?
Printable View
well i got the 360 in the 49 some what mocked up but keep hitting the firewall i dont mind cutting this i would like to talk to someone more knowledgeable about it any help?
is the oil pan sump causing you not to be able to move foward a bit .. i`m sure dif sump locations are available or modify the orginal sump a bit .. how bout the distrubitor .. does it hit also ?
My best advice is do not cut the firewall. It can turn into a nightmare. Tweak the other stuff like HOSS said. Re-configure the oil pan or find another one from another application and use the pick-up tube that came with it. Be sure to leave 1/4" to 3/8" between the bottom of the pickup screen and the floor of the oil pan. Use a little pyramid of modeling clay stuck to the screen and gently put the pan in place, then remove to check clearance.
If it's a 360 Ford the distributor isn't a factor..In the old days you just used a big hammer to make room..:3dSMILE:
no its not the oil pan its just the way the fire wall is shaped,its like i always say when all else fails use a big hammer :LOL::LOL::LOL::LOL:**)
it takes a very big hammer to get a 351 in a pinto .. and even a bigger one oddly enuff to get a V6 chevy in one ( and a toarch and welder )
http://i35.photobucket.com/albums/d1...g?t=1236787339
Must have been a nightmare to stuff a 351 with headers into a Pinto. I see the motor's moved to the right and tilted to the right as well. Wow.