Thread: cheap body bushings
Results 1 to 5 of 5
Threaded View
-
09-25-2008 03:06 AM #3
We buy ours at a 4 x 4 shop, they are made for Jeeps, and are about 2 inches in diameter x 1/2 inch thick. Made of semi hard rubber with a 1/2 inch hole in the middle, and cost only like a buck or two each. Nice part is, they are small and flat on both sides, so you just slip them in and run a bolt through them.
Don





LinkBack URL
About LinkBacks
Reply With Quote
It would be nice if this up and down crap would cease.
Back online