Printable View
Just finished up a Guage Cluster for a T-Bucket.
It'll be cut on Haas VF series and the material is aluminum.
http://www.clubhotrod.com/photopost/...T_PNL_4jpg.jpg
http://www.clubhotrod.com/photopost/...m/INST_PNL.jpg
The light blue rectangle will have a custom plaque with the owners name and logo if desired.
How does it fit into the dash Tom? Reason I ask is most T bucket dashes are pretty shallow. Does this dash curve down in the center, or what? Nice looking idea though.
Don
Show some pics please.I would really like to see the machines in progress. Neat stuff...
Heheh,
Not really sure how it fits Don.
Those two guys we're helping I told you about, gave me a piece of cardboard with a rough sketch and one of those generic underdash gauge panels and said, "Here, make up a gauge cluster for us".
Hotrodtrux,
Stay tuned,I'll be posting a ton of pics soon.
I'll let you in on a secret, We're right now cutting a model for a mold for a trans tunnel out of foam insulation.
I'm going to do a reverse engineering thread.
You'll be able to seel a ton of our stuff in action.
Tom