235 6, want headders

[Matt167]

well, my exhaust system had some ground clearence issues and 1 time I backed it out of my tent garage, and it got hung up on the ground from heaving and setteling.. It ripped it off, and the flex pipe I had coming off of the remains of the original pipe ( did that so I did not have to mess with the manifold bolts ) and the remains bent forward and kinked.. I'v since cut the pipe open so there is no excess backpreassure, but I can't run it like that... I'v always wanted Fentons, but always been concerned with the intake manifold as the factory manifold heats the intake. I know Fenton has a kit to block the intake heater and use water heat which I like, but I also notice that the Fentons have provisions for heat tubes.. what do I get to make this work.. I want to stay with the single 1bbl carb.

[MR. 427 Chevy]

Drop a 427 RAT in it and have fun this summer.. Do the "originals" work during the long NY Winters!!

[Matt167]

The car isn't ready for the road yet, should be by the end of the summer tho. right now all that is left is interior, a slight amount of bodywork and paint. engine, trans, brakes, lights, horn ect... all work fine. I really don't want to swap drivetrain.