Thanks for the replys,, but most of the rods I have ever built were based on a stock chassis,,,many being model As.. This particular rod, my daughter built for her senior project. It is a '34 Ford truck cab (with a title) using a model A chassis,,aftermarket axle/suspension,, and a driveline from a '76 Chevy pickup bought from my brother in law,,now scrapped the rest. There werent any numbers on the cab,,, there are on model A chassis but since I have had many lying around for years to use,, I never had titles, or regis for them. The cab has a title,, but since it was a bad body, and many pieces were refabbed, and a new firewall was made,,,, we need to get a number plate from a company, stamp in the numbers, and rivet it onto the door post. Then see what happens.... In all my 36 straight years of every day, building rods (pre-'48) I never saw something like this... What bothers me the most is the possibility of an open ended law stating that it now must be a 08 model... BUT ,, to be technical,, nothing newer than '76 was used except for the few aftermarket suspension pieces needed to complete the project. This also,, is not a fiberglass vehicle,, not a kit car,,, certainly not an '08 car,,so,, it should be honnored with the cab's title,,,But,,,I wonder...... Sean