37 Ford build--IE: old Header issues thread /37 Ford/5.0/GT40P heads

[34_40]

Hey E, thanks for the tip! I didn't even think about that. I was just going for the easiest place to get a ground. Hopefully, no damage was done, but if it was, I plan to change the 3rd member to different gears anyway. I got the idea for the jig from another site called Fordification, so I can't take credit for it. He built his jig out of steel tubing though. For a one-time use, I thought wood would be fine.

I was going to mention the same issue, it may also have created a bearing issue.. Hopefully the connection was through the center section fasteners. Other than that, it looks great! You do nice work Randy!

Could you remind me how all this started again? ROFL.. I thought you were working on the firewall??

[randyr]

Could you remind me how all this started again? ROFL.. I thought you were working on the firewall??

Actually, it all started with replacing the radiator.....

[34_40]

Actually, it all started with replacing the radiator.....

AH! Yes, that's it! I knew it was up front! And let me compliment you on the pics too! I always forget that part.. IF I remember to bring the camera, I forget to snap a photo or two

[bluestang67]

Well this is as far as i got over this time period . Had help but to many anvils to bang on LOL . Got the A almost all stripped of it's original paint . Also took some time off in W.V. really love the state . It's a 40 cal S/W .





http://good-times.webshots.com/video...02070080HbJkNP



Randy some good stuff was looking at parts tonight my self on the springs . I did get the sheet metal I needed to fix body . Now this is ready for the starting but still on the A . Want to get it going to make a better scene when it hits Ebay again .

[randyr]

Hey Dave, Bobby, Mike and the rest of you guys,

Geez, it seems like forever since I've posted! I've been so busy doing all my "survival" gigs that I haven't had much time to work on the car. But my creditors are happy that I'm generating enough income to pay them even though I'd rather be spending the money on my car! LOL!

Anyway, I just wanted to check in a wish all you guys a Merry Christmas and much hope & blessing in the New Year! Thanks for all the help, kudos & encouragement you've given me on my car and I look forward to the day when I can post pictures of me cruising down the street in it!! Until then, let's just keep pluggin away and get 'er done!!!

All the best to you and yours!!!
Randy

[34_40]

Hey Dave, Bobby, Mike and the rest of you guys,

Geez, it seems like forever since I've posted! I've been so busy doing all my "survival" gigs that I haven't had much time to work on the car. But my creditors are happy that I'm generating enough income to pay them even though I'd rather be spending the money on my car! LOL!

Anyway, I just wanted to check in a wish all you guys a Merry Christmas and much hope & blessing in the New Year! Thanks for all the help, kudos & encouragement you've given me on my car and I look forward to the day when I can post pictures of me cruising down the street in it!! Until then, let's just keep pluggin away and get 'er done!!!

All the best to you and yours!!!
Randy

Hi Randy! Yep, it's been quite some time since we've "chatted". I've been in survival mode as well, my department at work has been cut in half and for now I'm still employed! I'm hoping to get some better weather as it's been to cold to go to the garage.

May you and all the guys here have a Happy Holiday Season!

[IC2]

Guys - Have a great Christmas and a prosperous New Year. While we haven't all chatted as much as in the past, next year is another that we can start with anew. As far as the creditors, mine are still being held at bay and hopefully will stay there. The car progress - slow but sure, and the honey-do list, well beyond control.

[34_40]

Hey Dave, Bobby, Mike and the rest of you guys,

Geez, it seems like forever since I've posted! I've been so busy doing all my "survival" gigs that I haven't had much time to work on the car.

Anyway, Thanks for all the help, kudos & encouragement you've given me on my car and I look forward to the day when I can post pictures of me cruising down the street in it!! Until then, let's just keep pluggin away and get 'er done!!!

All the best to you and yours!!!
Randy

My Turn to catch up I guess.. I've spent the past few weekends working on the windows in the doors. Mounting the channels was a challenge but it finally came together today!
I only have lucite for now but the car does have windows in the doors that wind up and down!

So that's it for the car being weather tight! Now I've got to finish the hood install and paint it! Then when I'm a bit closer, I'll send in all the paperwork to the state and start the registration process...

So I hope you all enjoyed the holidays! And look forward to chatting with you all again!

[randyr]

My Turn to catch up I guess.. I've spent the past few weekends working on the windows in the doors. Mounting the channels was a challenge but it finally came together today!
I only have lucite for now but the car does have windows in the doors that wind up and down!

So that's it for the car being weather tight! Now I've got to finish the hood install and paint it! Then when I'm a bit closer, I'll send in all the paperwork to the state and start the registration process...

So I hope you all enjoyed the holidays! And look forward to chatting with you all again!

Hey Mike, great to see someone posting on our thread again! Of course, the rule (albeit unwritten) is that if you actually do some work on your car, you gotta post a pic or two of what you did!
I'm hoping to get started on mine again in another week or two. My next move is to pull the rearend back out, clean it up, paint it and bolt it back in to stay. I gotta change the gears to something taller than 2.75, too, so that I can take advantage of the new 5sp tranny. I'm thinking something in the mid to high 3's. Will let you know....

Randy