I have some, but havent shot all the pics yet. this swap isnt for the weak at heart. you have to lenghten then middle & the end of the frame, cut off the front of the S10 frame almost to the steering box , cut the inner fender wells along with cutting down the radiator core support which means the stock type radiator wont work and "I " will lose about 6-8 inches of rear floor space because the frame will be up into the truck itself because of how low I'm trying to get the truck. I am taking pics as I go along so everyone gets an idea what is going on and as soon as I get them developed I will post them....joe