last picture i have. hope that it helps with your project.
studebakerclyde
Printable View
last picture i have. hope that it helps with your project.
studebakerclyde
Clyde,
Could you tell what sort of front end he had under the car? It looks like it is very nicely done.
Thanks
Pat
hey pat,
the guy told me it was a fatman mustang II
studebaker
pat
it's a mustang II type made and installed by fatman here in the charlotte area
studebakerclyde
HI ALL : THIS IS ED CHECKING IN WITH THE 392 HEMI IN THE 56
HAWK. THE ENGINE IS IN, USED ORIGINAL MTS AND BUILT ADAPT-ERS TO FIT ENGINE. USED A MUNSIE 4 SPEED & A HYD. CLUTCH ON THE TRANS SNOUT. USED A PACKARD BODY SUPPORT WITH
DOUBLE HUMPS. CUT FRONT DRIVE SHAFT DOWN AND USED STOCK CENTER SUPPORT. AM NOW INSTALLING RACK AND PINION-POWER OF COURSE.
I AM TAKING PHOTOS BUT AM NOT COMPUTER WISE AS HOW TO
POST. WILL GET HELP. THANKS FOR ALL THE COMMENTS THEY HELP AND ENCOURAGE THE WORK. BY THE WAY I USED FULL HEADERS AND THE STEARING IS THE WORST PROBLEM...
CLEARANCE TO THE HOOD IS 1 1/2 INCHES.
THANKS ED
Here's a pic of a '53 from the recent Studebaker International meet held in Charlotte, NC..
It wasn't finished, but he was on the right track:cool:
Jeff:toocool:
Quote:
Originally posted by ED CHANDLER
HI : I GUESS IM A NEWBY HERE BUT NOT TO RODDING. I AM
BUILDING A "56" STUDE HAWK AND WANT TO PUT A 354 OR
392 CHRYSLER IN IT. WONDERING IF ANYONE OUT THERE HAS
CROSSED THIS BRIDGE?
WILL HAVE POWER STEARING , BRAKES AND TH400.
9 INCH FORD IN THE REAR AND MODEST TUB.
Here's a crappy pic of the rear end, which was way cool...
It 'was' back halved with tubs and a 4 link setup with coil overs.....and 6.70x15 Firestone bias ply tires with stock hubcaps...
It could swallow some huge M/T rollers, but it was in stealt mode.
I asked the owner how his rear tires would hold up, and he just smiled...:rolleyes:
Jeff:toocool:
Here's a pic of a '53 from the recent Studebaker International meet held in Charlotte, NC..
It wasn't finished, but he was on the right track
Jeff
quote:
--------------------------------------------------------------------------------
Originally posted by ED CHANDLER
HI : I GUESS IM A NEWBY HERE BUT NOT TO RODDING. I AM
BUILDING A "56" STUDE HAWK AND WANT TO PUT A 354 OR
392 CHRYSLER IN IT. WONDERING IF ANYONE OUT THERE HAS
CROSSED THIS BRIDGE?
WILL HAVE POWER STEARING , BRAKES AND TH400.
9 INCH FORD IN THE REAR AND MODEST TUB.
--------------------------------------------------------------------------------