Printable View
In addition to tinkering with hot rods I also tinker with large scale models and was wondering if anyone else did? I don't actually build them, I'm kind of a parts supplier. I do resin casting and although I do mostly 1/8th scale I do make some smaller stuff as well.
Thats cool, post some pics if you can I personally would love to see'em. The only scale I have done is 1/1 so far.
I make large scale models. They are approx 1/3 scale.
Made of timber. Mostly MDF but with other timbers.
This is a Woody I am presently doing. It will have a matching woody trailer behind it.
https://www.facebook.com/13817485221...488357/?type=3
I tried to do a 1/16 model of Revell top fuel front engine dragster-----------ended up making a 1/1 rear engine replacement--that worked out pretty nice
I've had better luck with the 1/25 die cast models from 1320inc.
https://public.fotki.com/BIG-JIM/items-for-sale/
Have a look at my fotki page
Those are Kool. I like the hemi and really diggin those E&J type 20's. I cast those in 1/8th and 1/12th scale. https://public.fotki.com/BIG-JIM/ite...hop-truck.htmlQuote:
Originally Posted by Alfster
That is totally awesome! You do amazing work. I really dig the Hemi and would love to have one to put on my shelf!Quote:
Originally Posted by Alfster
I used to build a lot of models when I was young, before I started working. (Before I got my driving permit) I haven't finished a model since. The last model I started was a 1968 Corvette that I pro streeted and primered. I did this when I was on a training trip for work and was stuck in a hotel and had nothing else to do. Maybe I should finish it. The real car is painted now.
My favorite ones I had were my 1966 or 67 cobras. I had a 1/8 scale cobra and 63 Corvette. Now the 1/8 kits are so expensive, I would just rather buy a real hot rod part than the model. When my kids are a few years older, I'll probably get back into it. I think they'll enjoy it.
just a few of the things I make.
http://images45.fotki.com/v1649/phot...0138252-vi.jpghttp://images42.fotki.com/v1650/phot...MGP8180-vi.jpghttp://images14.fotki.com/v219/photo...MGP4725-vi.jpghttp://images59.fotki.com/v1640/phot...mgp8883-vi.jpghttp://images45.fotki.com/v1649/phot...1653122-vi.jpghttp://images41.fotki.com/v1647/phot...1951032-vi.jpghttp://images45.fotki.com/v1649/phot...0137352-vi.jpghttp://images34.fotki.com/v1652/phot..._022333-vi.jpghttp://images34.fotki.com/v1606/phot...mgp2672-vi.jpghttp://images51.fotki.com/v282/photo...MGP3198-vi.jpghttp://images45.fotki.com/v153/photo...MGP3199-vi.jpghttp://images46.fotki.com/v10/photos...mgp3283-vi.jpghttp://images45.fotki.com/v148/photo...MGP3145-vi.jpghttp://images42.fotki.com/v727/photo...MGP3406-vi.jpg
Those are some mighty fine parts.
Are they resin cast? Please explain the process, in detail.
I am still into the model stuff a bit. I ran an aftermarket company for a long time in the 90's and early 2's. Machined Aluminum Specialties if you were around back then.
Nice looking parts.
I also do 3D Cad models and have stuff 3D printed if you are interested in anything like that. The printed parts make excellent masters for resin casting. :)
These are some 1/16th scale cheater slicks I modeled up and had printed.
http://images52.fotki.com/v1639/phot...MVC012F-vi.jpg
http://images59.fotki.com/v1640/phot...MVC003F-vi.jpg
They are 5 separate pieces so they are easy to cast. I can scale them to whatever size you want.
I can do just about anything you could think of.
Mark
Yes they are resin cast. There are a lot of different ways to cast. I use one piece open faced molds where ever possible. This is just a matter of using double sided tape to affix your part to a flat surface, put a mold box around it and pour your RTV over it. Twelve to sixteen hours later once the rubber sets you can remove the part. Then just mix 2 part resin mixed well into the mold and it hardens up in minutes and you have a part. Then you have 2 parts molds. In this case you do the same thing then flip it over once cured and pour the second side. With this one you can leave it like it is and just pour the resin in and press the two halves together. This is called a squish mold because it squishes the resin out. You can also cut a fill tube and a vent into a two part mold and pour the resin in that way. As you pour the resin in the air comes out the vent till the cavity is filled. Then you have 3 and 4 part molds. Those are very complex. Then you have slush casting and rotational casting. I'm doing a slush cast now of a 1/8th scale 33 ford 3 window coupe body. This is my first one. It is a lot of fun. The hardest part sometimes is planning the way to make the mold. You have to figure out how the resin is going to flow and where air may get trapped. It can be challenging at times. If you are on facebook look up my group RATRODZRUS SCALE MODEL CARS. there is a lot of info there. I go through things step by step.Quote:
Originally Posted by firebird77clone
I wasn't even thinking about 3D printing. It will truly revolutionize a lot of hobbies such as modeling.
In my drafting class, I used SOLIDWORKS to draw a balancing toy which was then 3D printed.
The balance wasn't quite right, due to the printing process. As a means of reducing material use, the interior of a part is made less dense.
But, I've still got it. It doesn't have any real value, just like the test piece I cut on a lathe for a machine tool technology class.
Here's that body I was telling you about. This is the first one.
http://images20.fotki.com/v1646/phot...51796_n-th.jpg
That looks very nice. I finally found a place that has 392 Hemi's. I picked up a 40 tudor model so now I can make a small version of my 40. I wonder which will get done first? :LOL:
Ryan you can find just about anything for 1/25th scale models. There is very little in 1/8th scale. That's why I'm making these things. There are a lot of guys out there that gave up models because their eyes aren't what they used to be so they started building the large stuff. But there are very few 1/8th kits out there and you can only build them just so many ways. So I'm doing my part to bring new things to the table.
I too have the Big T Roadster model kit that sits patiently waiting for me to finish the real one so that it can be built as the mini copy. 1/18th scale from memory too and I can't even remember what or who manufactured it but it has the triple 2 barrels etc on the SBC so the engine will be close to what the real thing has.
Yes sir, you're correct. Although, I've noticed there aren't many 39 40 Ford tudor bodies right now. I'll get more 1/16 and 1/8 scale stuff later when I might have less projects to complete. I have a 32 Ford 1/8 scale roadster body that I need to buy the rest of the parts for. It was one of those impulse buy kind of things. :LOL: I did pick up an old 1/25 40 Ford 2 door sedan kit and a 354 Hemi last week. Now I'll have to buy another 354 kit so I can get the dual quads. The other 354 kit I got had the chrome valve covers and supercharger. I'll save the supercharger for later. Maybe if I get the model done, I won't get so easily distracted and quit buying parts for the 68 GS400 etc. HahaQuote:
Originally Posted by BIG-JIM
Sorry I haven't been on here in a while. been busy making 1/8th scale bodies. This is the latest and greatest. I've added a 32 Vicky to the lineup. I've also added the 28/29 model A sedan and the 47 ford truck cab and the 32 sedan is next.
https://scontent-lga3-1.xx.fbcdn.net...1e&oe=5B1A52FE
https://scontent-lga3-1.xx.fbcdn.net...b2&oe=5ADE9177
https://scontent-lga3-1.xx.fbcdn.net...1c&oe=5B17BD66
https://scontent-lga3-1.xx.fbcdn.net...8c&oe=5AE0CD5D
https://scontent-lga3-1.xx.fbcdn.net...98&oe=5B183F1E
I also did a 32 3 window coupe.
https://scontent-lga3-1.xx.fbcdn.net...ab&oe=5AE95C82
Here's a group shot of some of the bodies. 32 ford pickup 33 ford roadster 47 ford truck cab
https://scontent-lga3-1.xx.fbcdn.net...e7&oe=5B138FF1
Very nice!