one other thing I did on my last car that worked real well, i mounted the panel to a piece of 1/8" steel and screwed a piece of 1/4" plate aluminum to it that had a 3" hole in the center so the steel was visible through the hole from the back side i then went to the hardware store and bought a 3" round flat magnet about 1/2" thick that had a center hole in it. i screwed it to the firewall under the dash, and viola I had a fuse panel you could pull down similar to Ron Francis panel, the magnet indexes in the aluminum and sticks to the steel and works like a charm for about 15 bucks.