Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 
Like Tree11Likes
  • 1 Post By 34_40
  • 2 Post By firebird77clone
  • 1 Post By firebird77clone
  • 1 Post By HOSS429
  • 1 Post By Whiplash23T
  • 1 Post By cffisher
  • 1 Post By Mike P
  • 3 Post By J. Robinson

Thread: Mig Welding
          
   
   

Results 1 to 11 of 11

Threaded View

  1. 12-06-2016 01:09 PM #7
    HOSS429's Avatar
    HOSS429
    HOSS429 is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Jun 2007
    Location
    New Market
    Posts
    2,590

    nashville is not so far from huntsville >. i`ll be right up .. HA ! .. outside of coming and showing you first hand we can not tell you how to begin .. and in all truth i say dont use flux core wire when iv`e never used flux core wire .. i hold the nozzle about 1/8 th off the material and lean it about 40 degrees to the right as i like to pull the weld towards me so i can see it fill the joint .. you can weld in either direction though .. if you pull too far away `feed to slow or have it set too hot it will simply feed back and melt the wire into your nozzle and weld itself to your tip ...buy some exta tips before you start practicing ..
    Last edited by HOSS429; 12-06-2016 at 01:23 PM.
    Rdobbs1977 likes this.
    iv`e used up all my sick days at work .. can i call in dead ?
    Reply With Quote Reply With Quote

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink