Lots of good info and ideas guys! The tuck fork I am going to have to build!
I posted this in the Bad Ast build thread.
I hit a yard sale a few weekends ago and picked up an old Sears scroll saw for 5 bucks...

It ran! I had to rewire it, put on a new switch and do a lot of cleaning and some fine tuning but she runs like a champ and I was cutting 1/4" aluminum with it Sunday morning!

I made a foam board blank to mock up gages in the van. I used 5 dollar saw to cut this out...
http://images55.fotki.com/v268/photo...MVC010F-vi.jpg
I used the scroll saw again to cut out some more foam core to make the speedo and tach. I used these to mock up the gage positions in the cluster.
[img]http://images16.fotki.com/v377/photo...MVC011F-vi.jpg[/img]
I have gotten 5 dollars worth of use out of that saw already! I use it almost every time I am out there working.
Mark