Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: 4L60E transmission question ....
          
   
   

Results 1 to 6 of 6

Threaded View

  1. #2
    moter is offline CHR Member Visit my Photo Gallery
    Join Date
    Jul 2008
    Location
    Depok, Indonesia
    Posts
    217

    These vehicle had problems with the ignition switch. There is an ignition feed to the fuse box that has the cluster and transmssion control on the same circuit. Usually this will happen on vehicles with a tilt column. As you tilt the wheel up and down the wires are moved that go to the ignition switch. I doubt you have an internal trans issue. Have the engine scanned first. One other thing that will cause problems is the vehicle speed sensors at the trans. The best thing to do is monitor both input and output shaft speeds while driving. This could explain speedo acting up also

    Scott
    Last edited by moter; 01-11-2009 at 07:29 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink