Very disappointed in Rally America.

We ordered 4 artilliary wheels from Rally America on Dec 9th. They promised to have them out the door in 3 weeks. They needed one week to build them and the powder coater needed 2 weeks. By January we hadn't gotten them so Dan called and Gary told him they had moved and got backed up, said he was using a new powdercoater who only needed 1 week to do them and that he would ship by last Friday. Called today to see if they went, and they haven't even started on them yet! :( After prodding his Son Jimmy a little come to find out they aren't sure they can make them at all. :mad: They were going to "try" us to see if they could do it.

I've dealt with a lot of the other wheel companies and they all seem to have this problem of not telling you the truth, but every report we saw on Rally America was that they were different. When I told Jimmy that we were disappointed and surprised that we were being lied to for so long he had very little to say.

Now it's back to square one and the last 6 weeks are lost waiting for something that wasn't even being made. Why can't people just tell you the truth? :mad: :mad:

Don

Dude that sucks did you pay them at all? and their yanking your chain. i'd be furious and words would fly over the phone.

no they can not..i run in to it all the time i just did a 425 nail head and got the run around on parts.. i have a big thing about people telling me the truth .i just think just how dumb do they think i am? and how many do they tell this crap to and do other buy there line? that really get me hot is when i have to tell a customer that one of my suppliers has drop the ball . it make me look bad

I have had the same problem with a certain cam company.
They tell me it will be two and a half weeks to custom grind a cam and you call them at two weeks to check the progress and they act like they never have even talked to you.
So you give them the info. again and they say it will be another two weeks in the mean time you look like a dumb-a$$ to your customer.
I am getting to the point I don't like to even order custom parts anymore.:(

erik i have had good luck with erson cams there fast one week turn around on two custom roller cam and they were two weeks out for a regind on a flat lifter cam and i had good luck with lunati before holley put there hooks in to them . and isky and howard do good but i do not deal with comp cam

Quote:

---

Originally Posted by pat mccarthy

erik i have had good luck with erson cams there fast one week turn around on two custom roller cam and they were two weeks out for a regind on a flat lifter cam

---

Their price's seems really good.
EPW/PBM keep sending me info. about them.
I might have to give them a try.
How did you know I was talking about Comp??

Quote:

---

Originally Posted by erik erikson

Their price's seems really good.
EPW/PBM keep sending me info. about them.
I might have to give them a try.

---

try them you like them i did deal with howards and were fast to but they could not grind the last custom the way i wanted. i am very happy with erson cams price to for a custom

Quote:

---

Originally Posted by erik erikson

Their price's seems really good.
EPW/PBM keep sending me info. about them.
I might have to give them a try.
How did you know I was talking about Comp??

---

:D i have tried to talk to them and they just do not care to grind any thing and takes way to long to talk to someone 1/2 hour on the phone and when you get someone i think they just do not seam to be on the ball :whacked:

Quote:

---

Originally Posted by pat mccarthy

:D i have tried to talk to them and they just do not care to grind any thing and takes way to long to talk to someone 1/2 hour on the phone and when you get someone i think they just do not seam to be on the ball :whacked:

---

I have had good luck with their "shelf-cams" but like you said they don't seem like they are on the ball.
One guy I talked to on the phone did'nt even sound old enough to shave.:whacked:

Pops, try The Wheel Smith, he's probably got them in stock unless you're doing something weird. Don't know about his powder coat time though, I've only bought bare from him. http://www.thewheelsmith.net/artillery_wheels.html

He even had some on display at the LA Roadster gig last summer.

If you or anyone needs ralley or smooth wheels, or any trim or caps, let me know. I am a dealer for Early Wheel, its a simple company that takes car of its dealers and customers.

I have tried to contact a few wheel companys about being a dealer and got absolutly poor communication from them....that was enough for me to turn away and not carry their product.

Bob, we discussed Wheel Smith tonight on the way to dinner. I told Dan about me calling them and basically blowing me off, so he called them. He got the same unconcerned attitude that I got. We aren't talking a small order either, the set was over $ 1200. Dan had given them his bank card info but has never been charged, which is good.

Surprising thing to me is that every report I had seen on any forum was that they rocked. Glowing reports and no negative feedback. I feel these forums are important because we are all able to tell others of our buying experiences, good or bad. If we can prevent someone else from making a mistake we have made that is a good thing.

Now we wouldn't buy from them if they cut the price in half and shipped tomorrow. :mad:

Don

Don let me know who you are going to deal with, I need a goofy set of wheels made for my Dodge..

Thanks
Harmon

Ok Harmon, will do.:)

Don

Wheel Vintiques has an artillery wheel in billet. Haven't seen the prices yet but $1200 will probably only get you two (2). :LOL:

Also found them at Pete Paulsen.com in steel for $125 to $300 each depending on size and coatings.

Not good that Rally doesn't have a product for which they advance advertise. Certain to hurt their reputation, as they will learn. Plymouth's had them as standard issue back in the early 30's, don't know why it would difficult for Rally to have them now.

I had to have a custom set of wheels made for the Thames ........... an odd width and strange backspacing .............. ordered them from Team III wheels .......... they make vintage ET mags ............ outstanding company to do business width ............ called me to discuss the necessities ........... then gave me a fairly accurate time estimate ............ called me back when they discovered they were going to miss their quoted date by two days .......... you can't beat that :cool: :cool:

Quote:

---

Originally Posted by Itoldyouso

Bob, we discussed Wheel Smith tonight on the way to dinner. I told Dan about me calling them and basically blowing me off, so he called them. He got the same unconcerned attitude that I got. We aren't talking a small order either, the set was over $ 1200. Dan had given them his bank card info but has never been charged, which is good.

Surprising thing to me is that every report I had seen on any forum was that they rocked. Glowing reports and no negative feedback. I feel these forums are important because we are all able to tell others of our buying experiences, good or bad. If we can prevent someone else from making a mistake we have made that is a good thing.

Now we wouldn't buy from them if they cut the price in half and shipped tomorrow. :mad:

Don

---

Don
as fellow club members I thought we should look into this! So I did some undercover work, and here is what I found......She's distracted them and taken your wheels!
http://i217.photobucket.com/albums/c...-girl-mags.jpg
Just kidding, I'm glad to read posts that give us knowledge into what places do what, etc. Sorry you guys are experiencing this. The thread on wiring harnesses helped me decide who to go with!