Quote Originally Posted by DennyW
I was telling my Nephew about that one. He wants to learn a little body work, and I mentioned that if he wanted it to look stock, that would be the way to go. His rocker panels are spot welded on now.
I never thought of that ,that would look factory useing it to make mock spot welds.I learn sumtin new all the time!!!!!!!!Thnx Denny.
Nitro,this is my first attempt and I did a small spot after those and it went much better than the spots in the pic!
I did notice that after about 5 or 6 uses ,it sticks better if you clean the end of the used stud with some 220 grit about every other time after that for it to stick good.I also noticed that after the stud had been used 2 or 3 times it was less likely to remove any existing metal.
Denny you can tell him the ones that I pulled the trigger on for about 2 to 3 seconds made the spot weld looking indents,the one in the middle is only a sec or less and anything over about 3 seconds becomes part of the truck.