THAT is clever! As always - thanks for sharing.
Printable View
THAT is clever! As always - thanks for sharing.
Hot rodding ingenuity at it's best. As techinspector 1 once said, " You can put any motor into anything with a sawzall, a torch and a BFH".
Thanks! I've been watching a lot of video's of Chad Hiltz (Bad Chad) from the show he had and his videos on You tube. That guy is a fabricating madman! Unreal the ideas he comes up with and how he pulls it off using a lot of junk.
Nice work, I've determined it's either build a car with a big checkbook or a bunch of improvising! Doubt I'd use the big checkbook method (even if I had one) when a bit of ingenuity and time will accomplish the same thing!
you could save MP&C a lot of work ..
You and I think alike, I have free reign to an HVAC guys scap in town, its very handy. Your doing great work as always!
WOW! Nice work!
Man, that is some killer work! I'd love to see a tutorial of of how you do that. Do you have anything on You Tube?
I finished up the channel across the truck bottom, just need to grind it down. I also was looking at the left quarter panel patch I welded on several years ago and realized what a crappy job I did on it and that I should have fixed the inner panel first. I cut it back off for a do over.
All hot rodders are approved for taking a mulligan on what at one time appeared to be a good plan!
I’m hip! Sometimes it’s an ongoing battle not to change your mind!
I think when a project takes a long time, it exposes us to more different directions / opinions / wants / needs.. I know it made it harder for me!