Thread: Resto-Mod Micro Car w/Sport Bike Power

Tweet

It looks like it is getting very close! Nice work.

Originally Posted by 53 Chevy5

I seen your wiring pics and curled up in the fetal position and had to talk to my therapist. Not quite over wiring my 53 I getting very anxious to see this this move.

Originally Posted by 40FordDeluxe

It looks like it is getting very close! Nice work.

Thanks! Yes, I am anxious to take it around the block with or without a floor!


Mounted the electrical components under the drivers seat and fabricated all of the seat belt mounts

[IMG]20170503_160254_resized by Ben Modified, on Flickr[/IMG]

[IMG]20170504_122517_resized by Ben Modified, on Flickr[/IMG]

[IMG]20170504_122505_resized by Ben Modified, on Flickr[/IMG]

[IMG]20170504_121043_resized by Ben Modified, on Flickr[/IMG]

http://www.BenModified.com

I am going to use the original R1 motorcycle gas tank and mount it in the truck of the Autobianchi. I made the rear mount today along with more roll cage to body connections...complete with lightening holes.

[IMG]20170509_160942_resized by Ben Modified, on Flickr[/IMG]
[IMG]20170509_161002_resized by Ben Modified, on Flickr[/IMG]

Also used some exhaust tubing to start fabricating the floor. The tubing surround the rear section of the upper control arm. It is slotted to allow movement. The caps are for access to the control arm nut.

[IMG]20170509_161116_resized by Ben Modified, on Flickr[/IMG]


These are just plumbing caps which I have machined down to fit.

[IMG]20170509_161547_resized by Ben Modified, on Flickr[/IMG]
[IMG]20170509_162200_resized by Ben Modified, on Flickr[/IMG]

http://www.BenModified.com

Bike gas tank is going in to the car

[IMG]20170510_103719_resized by Ben Modified, on Flickr[/IMG]
[IMG]20170510_144128_resized by Ben Modified, on Flickr[/IMG]

http://www.BenModified.com